
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X500UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 500mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X500UT is a double-acting aluminum mini round cylinder engineered for compact spaces requiring a very long reach. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force. The 500 mm stroke is a non-standard, made-to-order length for this 20 mm bore, maximizing extension where a small footprint is mandatory. The U suffix denotes a rigid flat-end back cover for direct fixed mounting.
This SKU lacks the -S magnet suffix, meaning a CMSG, DMSG, or EMSG position sensor cannot be fitted. The body utilizes a riveted rolling-packed aluminum barrel that is lightweight but not designed to be disassembled. Internal longevity is handled by a heterogeneous two-way piston seal that retains grease, paired with a carbon steel rod protected by 20 μm hard-chrome plating. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X500UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes lightweight routing gates on electronics assembly lines over a 500 mm span, using the 157 N push force to slide empty boards without taking up valuable floor space.
Ejects misaligned thin packaging cartons on a filling machine, relying on the compact 20 mm body to fit between tight guide rails while providing 132 N of pull force.
Moves a small label applicator head across a 500 mm stroke in a narrow printing press, where the fixed U back cover mounts rigidly to the machine frame.
The 20 mm bore offers 157 N push at 0.5 MPa. If you need less force, there is no smaller MBL bore available. If your application requires more power, stepping up to the 25 mm bore yields 245 N push at 0.5 MPa. Because this is a 500 mm stroke on an 8 mm rod, side-load tolerance is extremely low; an external guide or a pivot mechanism is strongly recommended to prevent rod-bearing bending.
This base MBL uses a fixed rubber bumper, not an adjustable air cushion (choose the MBLC variant for cushion adjustment). It does not hold position if air pressure is lost. Replacement match: 20 mm bore, 500 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa, the push force is 157 N and the pull force is 132 N. At 0.7 MPa, the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa. The 500 mm stroke is a non-standard made-to-order length, as the standard maximum for this 20 mm bore is 500 mm.
No, this specific MBL20X500UT SKU lacks the -S magnet suffix, so a CMSG, DMSG, or EMSG sensor switch cannot be installed. Additionally, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; it does not have an adjustable air cushion. If you need cushion adjustment, look at the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.