
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X60SCALBT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X60SCALBT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 20mm bore and 60mm stroke, it generates 157 N of push force and 132 N of pull force at 0.5 MPa. The riveted rolling-packed barrel crimps the front and back covers directly to the tube, creating an exceptionally light but permanently sealed assembly that is not designed to be disassembled like a traditional tie-rod cylinder.
This specific SKU includes a built-in magnet (-S) for position sensing via AirTAC CMSG reed or DMSG/EMSG electronic switches. It features a CA pivot back cover that swings on a pin to accommodate arcing or angular loads, paired with an LB foot mounting bracket. The Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating for wear resistance, and the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X60SCALBT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives the angular arcing motion of a thread guide on a narrow loom, utilizing the CA pivot back cover to swing smoothly while providing 157 N of push force at 0.5 MPa.
Positions small electronic connectors onto printed circuit boards within a congested assembly cell, using the -S magnet to trigger a DMSG solid-state sensor for precise 60mm end-position confirmation.
Actuates a small swing gate on a compact conveyor sorting lane, where the LB foot mount stabilizes the cylinder body while the clevis accommodates the side-to-side arc of the diverting arm.
At 0.5 MPa, this 20mm bore yields 157 N push force. If you need less clamping power, step down to the adjacent 20mm bore's smaller alternatives or manage pressure; if you need more force, step up to the 25mm bore, which provides 245 N push at 0.5 MPa. For applications requiring end-of-stroke energy absorption for faster cycles, select the MBLC variant with adjustable air cushioning instead of this base model's fixed rubber bumper.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact, but it does not hold the load or lock the rod when air pressure is lost or exhausted. If your application requires position holding without live pressure, install an external rod lock or a pilot-operated check valve. This configuration specifies a NPT tapered port thread, an M8x1.25 rod-end thread, a CA clevis back cover, and an LB foot mount.
Quick checklist
This 20mm bore cylinder uses a G1/8 port and an M8x1.25 rod-end thread. It delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa.
No, the base MBL features a fixed rubber bumper, not an adjustable cushion screw. If your application requires adjustable air cushioning to absorb heavier kinetic energy at the stroke ends, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.