
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X75SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X75SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. At its 20mm bore, it delivers a push force of 157 N and a pull force of 132 N at 0.5 MPa, making it well-suited for short 75mm linear positioning tasks. This specific SKU includes a built-in magnet (-S) for non-contact position detection using AirTAC CMSG reed or DMSG/EMSG electronic sensor switches.
Unlike a tie-rod body, the MBL features a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, prioritizing a lightweight footprint over field-rebuildability. This model is configured with a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X75SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates a lightweight diverter gate on a printed circuit board conveyor, using the 75mm stroke to route panels at 157 N push force without occupying valuable electronics-assembly floor space.
Pushes small fluidic test cartridges out of a clinical analyzer slot, relying on the CA pivot back cover to absorb slight angular misalignments during the 75mm ejection arc.
Advances a thin plastic packaging tray one position in a pill-counting machine, using the -S magnet to trigger a DMSG electronic sensor for precise cycle confirmation.
This 20mm bore provides 157 N of push force at 0.5 MPa; if your application requires less energy, the MBL series does not offer a smaller bore, so you would look outside the family for a micro-body cylinder. If you need substantially more force, stepping up to the 25mm bore yields 245 N of push force. For higher moving masses that require end-of-stroke tuning, select the MBLC variant for its adjustable air cushion instead of this fixed rubber bumper.
Because this SKU lacks a locking mechanism, it cannot hold a load in place if air pressure is lost or the valve is centered—the rod will drift. The replacement match for this unit is a 20mm bore, 75mm stroke, G1/8 port with NPT thread, a CA pivot back cover, and the -S magnet. Given the 75mm stroke combined with the small Ø8mm rod, use the CA clevis to prevent side-load binding, or step up to an MBLD double-rod cylinder for rigid anti-rotation guidance.
Quick checklist
This 20mm bore double-acting cylinder provides a push force of 157 N and a pull force of 132 N at 0.5 MPa. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable cushion screw (you would need the MBLC variant for adjustable air cushioning). Additionally, it is not a locking cylinder; if air pressure is lost, the rod will drift, so an external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.