
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X80CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X80CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 157 N of push force and 132 N of pull force at 0.5 MPa, making it ideal for small-part ejection or lightweight routing tasks over an 80 mm stroke. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing or angular loads. The carbon-steel piston rod has a 20 um hard-chrome plating for wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X80CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 157 N push force at 0.5 MPa and the CA pivot mount to follow the slight arcing motion of a cutting head routing small printed circuit boards.
Pushes lightweight plastic trays out of a molding press over an 80 mm stroke, relying on the compact riveted aluminum body to fit within the tight machine envelope.
Cycles a test probe onto electronic contacts, where the 132 N pull force safely retracts the delicate tooling and the fixed rubber bumper dampens the return impact.
If you need less force, the neighbouring MBL20 bore is the smallest available option, so stepping down means choosing a shorter stroke or a single-acting MSBL/MTBL push/pull variant. If your application requires more thrust, step up to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. For faster or heavier end-of-stroke impacts, consider the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion.
At 80 mm, this stroke is short enough to avoid severe rod-bearing bending, but the Ø8 mm rod still has low side-load tolerance. The CA clevis mount is excellent for absorbing angular misalignment, but if the load must be held without live air pressure, note that the rubber bumper only softens impact and does not lock the rod. You will need an external rod lock or pilot-operated check valve to prevent drift or drop.
Quick checklist
This 20 mm bore cylinder provides 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and uses a G1/8 port.
No, this specific SKU lacks the -S magnet suffix, so it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke damping; you must upgrade to the MBLC variant to get adjustable air cushioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.