
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X80SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X80SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It generates 157 N of push force and 132 N of pull force at 0.5 MPa, making it suited for light-duty positioning over its 80 mm stroke. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU includes a CA pivot back cover that swings on a pin to accommodate arcing or angular loads, and a built-in magnet (-S) for non-contact position detection using AirTAC CMSG, DMSG, or EMSG sensor switches. The Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating for wear resistance, while a heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X80SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a light pick-place head on a PCB depaneling router where the 157 N push force at 0.5 MPa is sufficient to plunge a routing bit, and the CA pivot absorbs minor gantry misalignment.
Swings a small guide flap on a packaging line to redirect small cartons, using the 80 mm stroke and pivot cover to maintain smooth motion without binding in a confined space.
Lifts thin plastic lids off assay microplates in a lab automation cell, relying on the built-in magnet to trigger a DMSG solid-state switch and confirm the 80 mm open position.
If you need slightly less force, the adjacent MBL16 bore offers a smaller footprint, or you can step up to the MBL25 bore which provides 245 N push at 0.5 MPa for heavier loads. Because this base MBL uses a fixed rubber bumper rather than an adjustable air cushion, select the MBLC variant if your 80 mm stroke requires softer end-of-stroke deceleration for faster cycling.
This cylinder does not hold its load when air pressure is lost or exhausted, as the rubber bumper only softens impact and acts as neither a lock nor a brake. Use an external rod lock or pilot-operated check valve if position holding is required. Replacement matching requires a 20 mm bore, 80 mm stroke, G1/8 port, NPT thread, CA pivot back cover, and the -S magnet.
Quick checklist
At 0.5 MPa it provides 157 N push and 132 N pull. At 0.7 MPa the push force is 220 N. The maximum theoretical force is 32 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact and is not adjustable. If you need adjustable air cushioning for heavier or faster moving loads, you must step up to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.