
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X125UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 125mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X125UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 245 N of push force and 206 N of pull force over a 125 mm stroke. The U suffix designates a rigid flat-end rear cover, providing a solid fixed mounting footprint for straightforward linear actuation.
Unlike tie-rod bodies, this cylinder uses a riveted rolling-packed barrel where the covers are crimped to the tube, making it exceptionally light but not designed for field disassembly. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Note that because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X125UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes a 125 mm carriage to feed printed circuit boards into a depaneling saw blade, utilizing the 245 N push force to overcome routing friction.
Ejects tested integrated circuits from a socket tray, where the compact riveted aluminum body fits within the dense handler mechanics.
Folds minor flaps on small pharmaceutical cartons, relying on the rigid U flat-end cover for a stable fixed mount against the conveyor frame.
This 25 mm bore generates 245 N push at 0.5 MPa. If your application requires less force, step down to the 20 mm bore (157 N push); for heavier loads, step up to the 32 mm bore (402 N push). The 125 mm stroke is well within the 500 mm standard limit. For faster or heavier cycling that requires end-position tuning, select the MBLC variant with adjustable air cushioning instead of the fixed rubber bumper. If you need spring-return actuation, consider the MSBL or MTBL single-acting models.
Because the MBL25X125UT has no -S magnet, it cannot provide rod-position feedback. Additionally, a plain MBL does not hold its position if air pressure is lost; the rod will drift. Use an external pilot-operated check valve if load holding is required. Replacement match: 25 mm bore, 125 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force increases to 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
No. The base MBL uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable air cushion (which requires the MBLC variant). Additionally, this SKU lacks the -S magnet, so it cannot accommodate CMSG, DMSG, or EMSG electronic or reed sensor switches for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.