
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X150SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X150SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 25mm bore and a 150mm stroke, generating 245N of push force and 206N of pull force at 0.5 MPa. The riveted rolling-packed barrel keeps the overall footprint minimal and lightweight, making it highly suitable for compact assembly machinery where space is at a premium.
This specific SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG, DMSG, and EMSG sensor switches to track rod position. It is configured with a CA pivot back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular loads. The carbon-steel piston rod features 20µm hard-chrome plating for wear resistance, and the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X150SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 150mm insertion stroke for placing through-hole connectors onto printed circuit boards, utilizing the 245N push force and CA pivot to self-align with the board during the arcing motion.
Actuates a pivoting diverter gate on a compact packaging conveyor, where the lightweight aluminum body fits within tight side-frame clearances and the magnet enables position confirmation.
Pushes molded plastic parts out of a tight injection mold cavity using a 150mm reach, relying on the CA clevis to absorb angular off-center loads during ejection.
This 25mm bore provides 245N of thrust at 0.5 MPa. If your application requires less force, step down to the 20mm bore (157N push); for heavier lifting, step up to the 32mm bore (402N push). Because this model features the CA pivot back cover, it is specifically sized for applications requiring angular movement rather than a rigid fixed push. The port thread form is NPT (tapered), and the port size is G1/8.
With a 150mm stroke, the Ø10mm piston rod has an extended reach that increases vulnerability to side-load bending. An external guide or pivot bracket is recommended to prevent rod-bearing wear. Note that this base MBL uses a fixed rubber bumper to soften end-of-stroke impact; for adjustable end-cushioning on faster cycles, select the MBLC variant. If unpowered load holding is required, this cylinder will drift when air pressure is lost, so an external rod lock or pilot-operated check valve is necessary.
Quick checklist
At 0.5 MPa, the push force is 245N and the pull force is 206N. At 0.7 MPa, the push force is 343N, with a maximum theoretical force of 50 kgf at 1.0 MPa. It uses a Ø10mm piston rod with an M10x1.25 rod-end thread.
The base MBL uses a fixed rubber bumper to absorb end-of-stroke impact; it does not have an adjustable air cushion (for that, choose the MBLC variant). Additionally, the bumper is not a locking mechanism, so the cylinder cannot hold a load vertically if air pressure is lost or exhausted.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.