
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X15SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X15SUT is a compact double-acting aluminum mini round cylinder engineered for extremely tight machine spaces. Operating at 0.5 MPa, it yields 245 N of push force and 206 N of pull force across its 15 mm stroke, making it ideal for short, high-frequency part ejection. The riveted rolling-packed barrel permanently crimps the covers to the tube, yielding a lightweight body that is not designed to be disassembled like a tie-rod cylinder.
This specific SKU includes a U flat-end back cover for rigid, fixed-foot rear mounting and a built-in magnet (-S) for non-contact position detection. The magnet pairs directly with AirTAC CMSG reed switches or DMSG and EMSG solid-state electronic sensors. Additionally, the carbon-steel piston rod features a 20 um hard-chrome plating, and the heterogeneous two-way piston seal actively retains grease for long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X15SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 245 N of push at 0.5 MPa to eject small printed circuit boards from a routing machine fixture, utilizing the 15 mm stroke to clear the work area rapidly.
Uses the built-in magnet with a DMSG solid-state sensor to verify the extended position of a 15 mm stroke when pushing semiconductor chips into a testing socket.
Acts as a compact, rigid stop for lightweight pharmaceutical trays on a conveyor, relying on the 206 N pull force at 0.5 MPa to retract and let product pass.
If your application requires less force, step down to the 20 mm bore, which provides 157 N push at 0.5 MPa. For heavier moves, step up to the 32 mm bore, delivering 402 N push at 0.5 MPa. Because this is a short 15 mm stroke, side-load bending is minimal, but the 10 mm rod still has low side-load tolerance compared to larger profile cylinders.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact; for adjustable air cushioning to handle faster or heavier loads, select the MBLC variant. Note that a plain MBL does not hold its load when air pressure is lost or the valve is centered—the rod will drift. Use an external rod lock or pilot-operated check valve if position holding is required. Replacement match: 25 mm bore, 15 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no mounting accessory, with magnet (-S).
Quick checklist
The MBL25X15SUT double-acting cylinder has a push force of 245 N and a pull force of 206 N at 0.5 MPa. At 0.7 MPa, the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No, the base MBL25X15SUT uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. If your application requires adjustable air cushioning for heavier loads, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.