
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X160SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X160SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 245 N of push force at 0.5 MPa over a 160 mm stroke, it fits applications needing moderate extension in a compact footprint. This genuine OEM configuration features a U flat-end rear cover for rigid mounting and a built-in magnet (-S) for position detection.
Unlike tie-rod bodies, the MBL utilizes a riveted rolling-packed barrel where the covers are crimped to the tube, prioritizing low weight over field-rebuildability. The carbon-steel piston rod features a 20 um hard-chrome plating to resist wear and corrosion. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion (which requires the MBLC variant). This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X160SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Extends 160 mm to shuttle populated circuit boards into an automated optical inspection station using 245 N of push force within a compact footprint.
Actuates a small mechanical arm to fold secondary packaging flaps on a filling line, relying on the built-in magnet to confirm the retracted position.
Pushes microfluidic cassettes into a medical analyzer bay, utilizing the rigid U flat-end mount to maintain alignment without deflection.
Select this 25 mm bore when you need 245 N of push force at 0.5 MPa and a 160 mm stroke. If your application requires less force, step down to the 20 mm bore (157 N push); if you need more power, step up to the 32 mm bore (402 N push). Because this model lacks an adjustable cushion, choose the MBLC variant for heavier or faster moving loads that need end-of-stroke deceleration.
With a 160 mm stroke, the Ø10 mm rod is susceptible to bending under side loads—use an external guide or a pivot mounting accessory to prevent rod-bearing damage. Note that the fixed rubber bumper only softens impact; it does not hold the load. If air pressure drops, the rod will drift, so add an external pilot-operated check valve if position holding is required. This SKU includes a -S magnet for CMSG (reed) or DMSG/EMSG (electronic) sensor switches, uses a G1/8 port with NPT thread, and has a U flat-end back cover.
Quick checklist
At 0.5 MPa it provides 245 N push and 206 N pull force. At 0.7 MPa the push force is 343 N, with a theoretical maximum of 50 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. If your load requires adjustable end-of-stroke deceleration, you must upgrade to the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.