
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X160UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X160UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 25mm bore and a 160mm stroke, generating 245 N of push force and 206 N of pull force at 0.5 MPa. The U suffix indicates a rigid flat-end rear cover, providing a fixed mounting footprint for applications requiring a straight, non-pivoting push action. Because this specific SKU lacks the -S suffix, it cannot accept a position sensor.
Unlike tie-rod bodies that can be unbolted and rebuilt, this unit utilizes a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, ensuring a lightweight yet durable assembly. Internal longevity is maintained by a heterogeneous two-way piston seal that retains grease, while the carbon steel piston rod features 20 μm hard-chrome plating to resist wear and surface corrosion during repetitive cycles. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X160UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes populated PCB shuttles out of a testing bay using 245 N of force, fitting neatly into the tight clearances of automated test fixtures.
Actuates a small pneumatic flap to divert lightweight plastic injection-molded components down a reject chute on a high-speed conveyor line.
Provides a steady 206 N pull force to maintain tension on a wire spooling winder, with the rigid U cover ensuring the cylinder stays fixed under varying loads.
With a 245 N push force at 0.5 MPa, this 25mm bore suits light-duty positioning. If your mechanism requires less force, step down to the 20mm bore (157 N push); for heavier mechanisms, step up to the 32mm bore (402 N push). For tasks needing end-position flexibility rather than a rigid rear mount, the CA pivot back cover is a better fit. If your application requires adjustable end-of-stroke cushioning for heavier moving masses, select the MBLC variant, as the base MBL uses a fixed rubber bumper.
At 160mm of stroke, the 10mm rod is susceptible to bending under side loads. Use an external guide rail to support the payload. Note that a plain MBL does not hold its load when air pressure is lost or the valve is centered—the rod will drift. Use an external pilot-operated check valve if position holding is required.
Quick checklist
The 25mm bore has a G1/8 port and a 10mm rod. At 0.5 MPa it provides 245 N push and 206 N pull. At 0.7 MPa the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No, this specific SKU lacks a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact; it does not have an adjustable cushion screw (select the MBLC variant for adjustable air cushioning).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.