
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X200-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X200-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It provides 245 N of push force and 206 N of pull force at 0.5 MPa. The 200 mm stroke makes it suitable for moving small jigs or ejecting parts over a longer travel distance without taking up the footprint of a profile cylinder. Because this SKU uses a CA pivot back cover, it is built to swing freely on a clevis pin, accommodating arcing or angular loads rather than rigidly binding the assembly.
Inside the riveted rolling-packed aluminum barrel, a heterogeneous two-way piston seal retains grease for long service life, while the carbon-steel rod features 20 µm hard-chrome plating for wear and corrosion resistance. Note that this specific configuration lacks the -S magnet suffix, so it cannot accept a CMSG, DMSG, or EMSG position sensor switch. The endcap relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X200-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a yarn guide arm across a 200 mm path to thread looms, using the CA pivot to accommodate the slight arc of the traversing motion while applying 245 N of force.
Pushes small parcels off a conveyor belt over a 200 mm stroke, where the clevis mounting allows the pusher arm to pivot safely if a box misaligns and jams.
Actuates a small parts bin over 200 mm to dump components into a hopper, leveraging the pivot back cover to handle the changing angular load as the bin rotates.
If you need less force, step down to the 20 mm bore, which yields 157 N push at 0.5 MPa. If your application requires more thrust, step up to the 32 mm bore, delivering 402 N push at 0.5 MPa. For faster or heavier moves requiring end-stroke deceleration, select the MBLC variant with its adjustable air cushion. If you need a spring-return function, consider the MSBL or MTBL single-acting models. Keep in mind the plain MBL does not hold its load when air pressure is lost or the valve is centered; use an external rod lock or pilot-operated check valve for fail-safe holding.
At a 200 mm stroke, the 10 mm rod has low side-load tolerance. The CA pivot back cover helps manage angular stresses, but for strict linear guidance over this travel, add an external guide rail or switch to the MBLD double-rod anti-rotation cylinder. This SKU features a G1/8 port, NPT threaded port form, and an M10x1.25 rod-end thread.
Quick checklist
At 0.5 MPa, this 25 mm bore cylinder outputs 245 N push and 206 N pull. At 0.7 MPa, push increases to 343 N, with a maximum theoretical force of 50 kgf at 1.0 MPa. It uses a G1/8 port, a NPT port thread form, and an M10x1.25 rod-end thread.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact and cannot be adjusted like the MBLC air cushion variant. Additionally, this SKU lacks the -S magnet suffix, so CMSG, DMSG, or EMSG electronic position sensors cannot be fitted.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.