
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X200SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X200SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 25mm bore and 200mm stroke, it yields 245N push and 206N pull force at 0.5MPa. This specific SKU includes a built-in magnet (-S) for CMSG reed or DMSG/EMSG solid-state sensor switches to track rod position, and a CA pivot back cover that swings on a pin to accommodate arcing or angular loads.
Unlike tie-rod bodies, the MBL uses a riveted rolling-packed aluminum barrel that crimps the covers to the tube for minimal weight. The 10mm carbon-steel piston rod features 20μm hard-chrome plating for wear resistance, while a heterogeneous two-way piston seal retains grease for long service life. End-of-stroke deceleration relies on a fixed rubber bumper, not an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X200SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a cutting head along a 200mm path to singulate populated circuit boards, using the 245N thrust and CMSG sensor to confirm cut completion.
Actuates a sealing jaw in a vertical form-fill-seal machine, where the CA pivot absorbs slight angular arm swings during packaging cycles.
Pushes small brass valve stems into a housing fixture, relying on the compact aluminum body to fit within a dense multi-spindle lathe station.
For lower force needs, the 20mm bore neighbor provides 157N push at 0.5MPa; if your application demands more thrust, step up to the 32mm bore which provides 402N push at 0.5MPa. If you need single-acting push or pull operation, consider the MSBL or MTBL variants (available in 20-40mm bores).
At 200mm stroke, the 10mm rod is highly susceptible to side-load bending; leverage the CA clevis mount with an SDB pivot bracket to absorb angular misalignment, or add an external guide rail. This cylinder cannot hold a load if air pressure drops—the fixed rubber bumper softens end impact but acts as no brake. For heavier end-loads, upgrade to the MBLC variant which features adjustable air cushioning. Replacement match: 25mm bore, 200mm stroke, G1/8 port, NPT thread, CA pivot back cover, S magnet.
Quick checklist
At 0.5MPa, this 25mm bore cylinder provides 245N push and 206N pull force. At 0.7MPa, push force increases to 343N. The maximum theoretical force is 50kgf at 1.0MPa.
No, the base MBL uses a fixed rubber bumper to soften the end-of-stroke impact. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.