
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X20CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 20mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X20CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a 245 N push force at 0.5 MPa over a 20 mm stroke, making it ideal for short, precise movements. The CA pivot back cover allows the body to swing on a pin, accommodating arcing or angular loads that a rigid fixed-end cylinder cannot handle.
Built with a riveted rolling-packed aluminum barrel, the unit is permanently crimped for lightweight durability rather than designed for tie-rod disassembly. The Ø10 mm carbon-steel piston rod features 20 µm hard-chrome plating for wear resistance, while a heterogeneous two-way piston seal retains grease for a long service life. This SKU lacks the -S suffix, so it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X20CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Ideal for small assembly machines where the 245 N push force actuates a 20 mm grip stroke, while the CA pivot absorbs slight misalignment during part transfer.
Drives lightweight sorting flaps on conveyor lines; the clevis mounting allows the gate to swing naturally without binding the rod under angular loads.
Folds cardboard flaps on compact carton sealing machines, using the short 20 mm stroke and 206 N pull force to retract the folder arm quickly.
At 0.5 MPa, this 25 mm bore generates 245 N push and 206 N pull. If you need less force, step down to the 20 mm bore (157 N push); if your application requires more power, step up to the 32 mm bore (402 N push). The CA pivot back cover is specifically designed for swinging or arcing loads—pair it with an SDB pivot bracket or a clevis pin for optimal articulation.
The base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion (choose the MBLC variant for cushion adjustment). Because it is double-acting, air drives the rod in both directions. Note that this cylinder does not hold its load if air pressure is lost or the valve is centered—the rod will drift without a pilot-operated check valve or external rod lock. Port size is G1/8 with a NPT thread form, and the rod-end thread is M10x1.25.
Quick checklist
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No. This specific SKU lacks the -S suffix for a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG sensor switches. You must select an MBL25X20SCA model if you require rod position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.