
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X25-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X25-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a 245 N push and 206 N pull force at 0.5 MPa, making it well-suited for short 25 mm actuation tasks. Because this SKU uses the CA pivot back cover, it swings on a pin to accommodate arcing or angular loads rather than rigidly locking down.
Inside, the riveted rolling-packed barrel crimps the covers directly to the tube for a lightweight footprint, meaning it is not designed to be unbolted or rebuilt like a tie-rod cylinder. The carbon-steel piston rod features a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. Note that this specific configuration lacks the -S magnet suffix, so it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a lightweight sorting gate on a packaging line using its 245 N push force and CA pivot back cover to smoothly arc the mechanism across a 25 mm stroke.
Pushes small stamped metal parts out of a press bed using the 206 N pull force, relying on the clevis mount to absorb the angular load during rapid ejection.
Pivots a compact hopper lid open and closed in a confined electronics assembly cell, utilizing the short 25 mm stroke and riveted aluminum body to save space.
Stepping down to the MBL20 bore drops the 0.5 MPa push force to 157 N, while stepping up to the MBL32 raises it to 402 N. The CA clevis mount on this 25 mm bore is ideal for short-stroke pivoting mechanisms, but if your machine requires end-of-stroke deceleration for heavier moving masses, you should step up to the MBLC variant which adds an adjustable air cushion. The base MBL uses a fixed rubber bumper that softens impact but does not lock the rod.
Because a plain MBL does not hold its position when air pressure is lost or the valve is centered, the rod will drift or drop under load. If gravity or vertical positioning must be maintained without live pressure, install an external pilot-operated check valve or a dedicated rod lock. This replacement match features a 25 mm bore, 25 mm stroke, G1/8 port size, NPT thread form, and a CA pivot back cover.
Quick checklist
At 0.5 MPa this cylinder provides 245 N push and 206 N pull force. At 0.7 MPa the push increases to 343 N, with a theoretical maximum of 50 kgf at 1.0 MPa. It operates at a speed of 30-800 mm/s.
No, because this SKU lacks the -S suffix for a built-in magnet, it cannot accept CMSG, DMSG, or EMSG electronic or reed sensor switches. You would need to specify an MBL25X25S-CA variant to enable rod position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.