verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$38.60 $46.10Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT

The AirTAC MBL25X250-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It generates 245 N of push force and 206 N of pull force at 0.5 MPa, making this 250 mm stroke unit well-suited for mid-range linear actuation. The riveted rolling-packed barrel design keeps the body light and small, fundamentally differing from heavy tie-rod cylinders because it is built as a permanently crimped assembly rather than a rebuildable housing.

This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing freely on a pin to accommodate arcing or angular loads during movement. It lacks the -S magnet suffix, meaning it cannot accept a CMSG, DMSG, or EMSG position sensor switch. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the Ø10 mm carbon steel piston rod features 20 μm hard-chrome plating to resist wear and corrosion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT Is Used

memory

PCB Conveyor Diversion

Pushes lightweight routing gates on SMT lines using 245 N at 0.5 MPa, where the CA pivot absorbs slight angular misalignment common in conveyor frames.

inventory_2

Carton Flap Folding

Folds small cardboard flaps during case packing, utilizing the 250 mm stroke to clear tall carton profiles before the sealing station.

biotech

Sample Tube Transfer

Moves diagnostic sample racks between testing modules, benefiting from the lightweight aluminum body in high-speed lab automation.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT the Right Cylinder?

Stepping down to the 20 mm bore drops the 0.5 MPa push force to 157 N, whereas stepping up to the 32 mm bore raises it to 402 N. If your cycle ends violently and the fixed rubber bumper causes shock, switch to the MBLC variant for an adjustable air cushion. Because this is a 250 mm stroke on a small Ø10 mm rod, long unsupported strokes have low side-load tolerance; an external guide or the MBLD double-rod type is recommended to prevent rod-bearing bending. Note that the rubber bumper only softens end-of-stroke impact and does not hold the load—if air pressure is lost or the valve is centred, the rod will drift and drop, requiring an external rod lock or pilot-operated check valve to maintain position. Replacement match: 25 mm bore, 250 mm stroke, G1/8 port, NPT thread, CA back cover, no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT FAQ

At 0.5 MPa, this 25 mm bore cylinder provides 245 N push and 206 N pull force. At 0.7 MPa, the push force is 343 N, with a theoretical maximum of 50 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.

No. This base MBL model uses a fixed rubber bumper, not an adjustable air cushion (you must choose the MBLC variant for that). Additionally, because this SKU lacks the -S suffix, it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X250-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.