verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$41.08 $48.58Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT

The AirTAC MBL25X250SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 245 N of push force at 0.5 MPa, this 25 mm bore unit features a 250 mm stroke and a built-in magnet for position sensing. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing or angular load applications.

Unlike tie-rod bodies, the aluminum barrel is riveted and rolling-packed for a lightweight footprint, and it uses a heterogeneous two-way piston seal that retains grease for a long service life. The Ø10 mm carbon steel rod is hard-chrome plated for wear resistance. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts; if your cycle requires adjustable end-cushioning, consider the MBLC variant. An -S suffix means this SKU is wired for AirTAC CMSG (reed) and DMSG / EMSG (solid-state) sensor switches. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT Is Used

precision_manufacturing

Pick-and-Place Arcs

The CA clevis allows the cylinder to swing during a 250 mm transfer stroke, ideal for moving small electronic components between conveyor belts on a PCB assembly line.

inventory_2

Carton Flap Folding

Provides 245 N of push force to fold lightweight cardboard flaps on a packaging machine, with the pivot mount absorbing angular misalignment during the arc.

conveyor_belt

Diverter Gate Actuation

Uses the integrated magnet and a DMSG electronic sensor to confirm a 250 mm gate extension on a sorting conveyor, handling small parcel routing accurately.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT the Right Cylinder?

Selecting this 25 mm bore makes sense when you need 245 N push and 206 N pull at 0.5 MPa. If your payload is lighter, stepping down to the 20 mm bore drops the output to 157 N push, while moving up to the 32 mm bore yields 402 N push for heavier fixtures. The 250 mm stroke requires careful alignment: the small Ø10 mm rod has low side-load tolerance, so the CA pivot back cover on this SKU is essential to prevent rod-bearing bending. For rigid anti-rotation needs over this long stroke, an external guide or the MBLD double-rod type is advised.

Keep in mind a plain MBL does not hold its position if air pressure is lost or the valve is centered—the rod will drift. The rubber bumper only softens impact, acting neither as a lock nor a brake. To replace this unit exactly, match the 25 mm bore, 250 mm stroke, G1/8 port (NPT thread form), CA pivot back cover, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT FAQ

At 0.5 MPa this cylinder pushes with 245 N and pulls with 206 N. At 0.7 MPa the push force is 343 N, and the maximum theoretical force is 50 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable air cushion. If your application requires tunable cushioning for heavier or faster moving loads, you should step up to the AirTAC MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X250SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.