verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X250SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke250 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$41.08 $48.58Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT

The AirTAC MBL25X250SUT is a double-acting aluminum mini round cylinder engineered for tight assembly spaces. It delivers 245 N of push force and 206 N of pull force at 0.5 MPa, making it suitable for moving small jigs over a 250 mm travel. A built-in magnet (-S) allows CMSG reed or DMSG and EMSG solid-state sensor switches to track rod position for end-of-stroke confirmation.

This 25 mm bore unit features a Ø10 mm carbon steel rod with 20 µm hard chrome plating to resist wear and corrosion. The riveted rolling-packed barrel keeps the overall footprint small and lightweight, though it is not designed to be disassembled like a tie-rod cylinder. The U flat-end back cover provides a rigid fixed rear mounting face for straightforward inline installation. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke250 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT Is Used

memory

PCB Component Placement

Uses 245 N of push at 0.5 MPa to shuttle electronic pick-and-place heads across a 250 mm axis within dense SMT machinery.

inventory_2

Bin Lid Actuation

Extends 250 mm to pop open compact sorting chute doors, where the U flat-end cover mounts rigidly to the machine subframe.

biotech

Lab Sample Routing

Moves fluidic test cartridges between analysis stations, relying on the -S magnet and DMSG electronic switch for timing.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT the Right Cylinder?

This 25 mm bore generates 245 N push at 0.5 MPa. If your payload is lighter, step down to the 20 mm bore (157 N push); for heavier lifts, step up to the 32 mm bore (402 N push). The base MBL uses a fixed rubber bumper to soften end-of-stroke impact—upgrade to the MBLC variant if your cycle speed requires adjustable air cushioning. Because the cylinder relies on live air pressure, the rod will drift if air is lost or the valve is centered; use an external pilot-operated check valve if the load must be held.

At 250 mm of stroke, the Ø10 mm rod is highly susceptible to side-load bending. Prevent premature seal wear and rod bearing failure by guiding the load externally with a linear rail, or switch to the MBLD double-rod cylinder for anti-rotation support. Replacement match: 25 mm bore, 250 mm stroke, G1/8 port, NPT thread, U flat-end back cover, -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT FAQ

At 0.5 MPa it provides 245 N push and 206 N pull force; at 0.7 MPa push increases to 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa. The double-acting speed range is 30-800 mm/s.

No, the base MBL25X250SUT uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. If your application requires tunable end-cushioning for faster cycles, select the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X250SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X250SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.