verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X25SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke25 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$33.55 $41.05Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT

The AirTAC MBL25X25SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 245 N push and 206 N pull force at 0.5 MPa, making it well-suited for short 25 mm clamping and ejection tasks. As a non-standardized mini cylinder, it prioritizes a small footprint and low weight over ISO interchangeability.

This specific SKU includes a U flat-end back cover for rigid rear mounting and a built-in magnet (-S) for use with AirTAC CMSG, DMSG, or EMSG sensor switches to detect rod position. The riveted rolling-packed barrel is crimped to the covers for lightness, while the Ø10 mm carbon-steel rod features 20 µm hard-chrome plating for wear resistance. The heterogeneous two-way piston seal actively retains grease for long operational life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke25 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT Is Used

precision_manufacturing

PCB Router Hold-Down

Provides 245 N of clamping force at 0.5 MPa to secure small printed circuit boards inside a compact routing machine during high-speed spindle profiling.

inventory_2

Thermoformed Tray Ejector

Uses the 25 mm stroke to push lightweight plastic trays out of a packaging mold cavity, fitting neatly within the tight mechanical envelope of a packaging line.

memory

Connector Insertion Stop

Acts as a hard mechanical stop for inserting pin headers into electronic connectors, leveraging the -S magnet and a DMSG solid-state switch to verify the exact insertion depth.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT the Right Cylinder?

If you need less force, step down to the Ø20 bore (157 N push @0.5 MPa); if your fixture requires more thrust, step up to the Ø32 bore (402 N push @0.5 MPa). For applications needing end-of-stroke speed damping, select the MBLC variant with its adjustable air cushion instead of this base model. The fixed rubber bumper on this unit only softens end-impact and does not lock the rod. Because the MBL is double-acting, air drives both extend and retract motions, but the rod will drift if air pressure is lost. Use an external pilot-operated check valve if the load must be held during an air failure. Replacement match: 25 mm bore, 25 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no mounting accessory, with -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT FAQ

At 0.5 MPa it provides 245 N push and 206 N pull. At 0.7 MPa the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.

No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact. If you need an adjustable air cushion for heavier or faster moving loads, choose the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X25SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X25SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.