
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X300UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X300UT is a double-acting aluminum mini round cylinder engineered for compact machinery where space is at a premium. It provides a push force of 245 N and a pull force of 206 N at 0.5 MPa, utilizing a 300 mm stroke to move small loads efficiently across automated stations.
This SKU features a rigid U flat-end back cover for fixed rear mounting, and because it lacks the -S suffix, it cannot accept a position sensor. The riveted rolling-packed barrel permanently crimps the covers to the tube for a lightweight footprint, while the carbon-steel piston rod is treated with 20 um hard-chrome plating to resist wear and corrosion. A heterogeneous two-way piston seal retains grease internally for long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X300UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes lightweight packages on a 300 mm lane diverter using 245 N of thrust at 0.5 MPa without consuming valuable floor space.
Moves bare circuit boards between inspection stations on a 300 mm linear shuttle, relying on the rigid U cover for stable fixed mounting.
Ejects small plastic molded parts from a tight fixture, absorbing the end-of-stroke impact via the built-in fixed rubber bumper.
Stepping down to the MBL20X300 reduces the push force to 157 N at 0.5 MPa, whereas stepping up to the MBL32X300 increases it to 402 N. This base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts; for heavier or faster cycling loads, consider the MBLC variant which offers adjustable air cushioning. Note that air pressure does not hold the rod in place if the supply drops or the valve is centered—an external pilot-operated check valve is required to lock a suspended load.
With a 300 mm stroke on a Ø10 mm rod, the cylinder has low side-load tolerance. To prevent rod-bearing bending under offset loads, use an external guide rail, select a CA pivot back cover for arcing movements, or switch to the MBLD double-rod type for anti-rotation support. Replacement match: 25 mm bore, 300 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa it delivers 245 N push and 206 N pull. At 0.7 MPa the push force is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No, because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.