
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X400UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X400UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It features a 25mm bore and a 400mm stroke, delivering 245N of push force and 206N of pull force at 0.5 MPa. This genuine AirTAC component uses a U-type flat-end back cover for rigid fixed mounting, making it suitable for linear pushing tasks where rear pivot swing is not required.
Internally, the riveted rolling-packed barrel is crimped to the covers for a lightweight, space-saving profile that is not designed to be disassembled like a tie-rod body. The carbon steel piston rod features a 20µm hard-chrome plating to resist wear and corrosion, while a heterogeneous two-way piston seal retains grease for a long service life. Note that because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X400UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes lightweight printed circuit boards between parallel conveyor belts using its 245N push force over a 400mm span without occupying excessive vertical space.
Actuates a lightweight routing flap in a small packaging line, utilizing the rigid U flat-end back cover to maintain a fixed alignment during the 400mm travel.
Extends to push empty component trays out of a vertical elevator magazine, where the compact riveted aluminum body fits neatly into the machine's narrow frame.
When sizing this 25mm bore unit, stepping down to the 20mm bore reduces the output to 157N push at 0.5 MPa, while stepping up to the 32mm bore increases it to 402N. The base MBL uses a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion; choose the MBLC variant if your 400mm travel requires precise end-deceleration for heavier moving loads. Because this cylinder lacks a magnet, you cannot track rod position without external limit switches. Furthermore, a plain MBL does not hold its position if air pressure drops—the rod will drift, so add an external rod lock or pilot-operated check valve if a load must be safely suspended.
At 400mm of stroke, the Ø10mm piston rod is highly susceptible to bending under side loads. To prevent rod-bearing damage, guide the load externally or switch to the MBLD double-rod type for anti-rotation support. For replacement, match the 25mm bore, 400mm stroke, G1/8 port, NPT thread form, U flat-end back cover, and the absence of a magnet.
Quick checklist
At 0.5 MPa, this 25mm bore cylinder provides 245N of push force and 206N of pull force. At 0.7 MPa, the push force increases to 343N, with a theoretical maximum of 50 kgf at 1.0 MPa. It operates at a speed of 30-800 mm/s.
No, this specific SKU lacks the -S magnet suffix, so it cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke damping; you must select the MBLC variant if you need an adjustable air cushion to slow the rod.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.