
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X450UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 450mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X450UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Delivering 245 N of push force and 206 N of pull force at 0.5 MPa, this 25 mm bore, 450 mm stroke unit suits extended reach tasks. The U flat-end back cover provides a rigid, fixed rear mounting face for straightforward rigid-body integration.
Unlike tie-rod rebuildable bodies, the MBL features a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, ensuring a lightweight profile. It relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable cushion. Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X450UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 245 N pop-up transfer gate at 450 mm stroke to route bare PCBs between conveyor lanes in SMT lines.
Extends 450 mm to fold secondary packaging flaps on small cartons where a larger ISO 15552 cylinder would not fit.
Pushes small metal bar material out of a collet with 245 N, fitting into the compact footprint of a benchtop CNC lathe.
If you need less reach, the 20 mm bore neighbor provides 157 N push at 0.5 MPa; for higher force, step up to the 32 mm bore yielding 402 N. For faster, heavier 450 mm moves, consider the MBLC variant which adds adjustable air cushioning. Note that a plain MBL does not hold its load if air pressure is lost or the valve is centered—the rod will drift.
At 450 mm, the 10 mm rod is highly susceptible to side-load bending. You must use an external guide, or switch to the MBLD double-rod anti-rotation type to prevent rod-bearing damage. Replacement match: 25 mm bore, 450 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no magnet.
Quick checklist
At 0.5 MPa it provides 245 N push and 206 N pull. At 0.7 MPa push is 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No, because this SKU lacks the -S suffix, it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. You must order a -S variant for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.