
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X500-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 500mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X500-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 245 N of push force and 206 N of pull force across a 500 mm stroke. The CA pivot back cover allows the body to swing on a pin, making it ideal for arcing and angular load applications where a rigid flat-end mount would bind.
This riveted rolling-packed barrel is crimped at the factory for a lightweight footprint but is not designed to be disassembled like a tie-rod cylinder. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. Because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X500-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a yarn guide arm through a 500 mm arc using the CA pivot back cover, applying 245 N of push force to shift weaving patterns without binding.
Pivots a sorting flap on a packaging conveyor, relying on the 206 N pull force to retract the gate quickly in cramped sorter enclosures.
Extends 500 mm to push empty totes into a stacking cradle, where the fixed rubber bumper absorbs the repetitive end-of-stroke impact.
Stepping down in force, the neighbouring 20 mm bore yields 157 N push at 0.5 MPa, while stepping up to the 32 mm bore provides 402 N. If your cycle speed creates severe end-impact shocks, upgrade to the MBLC variant for adjustable air cushioning. Remember that a plain MBL does not hold its position if air pressure drops; use an external rod lock for suspended loads.
With a 500 mm stroke on a Ø10 mm rod, side-load tolerance is minimal. The CA clevis mount helps accommodate angular misalignment, but you should still use an external guide or consider the MBLD double-rod anti-rotation type to prevent rod-bearing bending. Replacement match: 25 mm bore, 500 mm stroke, G1/8 port, NPT thread, CA pivot back cover, no magnet.
Quick checklist
At 0.5 MPa it pushes with 245 N and pulls with 206 N. At 0.7 MPa the push force is 343 N, with a theoretical maximum of 50 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
No. This SKU lacks the -S magnet suffix, so it cannot accept CMSG, DMSG, or EMSG sensor switches. It also uses a fixed rubber bumper instead of an adjustable cushion; for adjustable air cushioning, choose the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.