verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X60CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke60 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$32.96 $40.46Save 18% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT

The AirTAC MBL25X60CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 25mm bore and 60mm stroke, it generates 245 N of push force and 206 N of pull force at 0.5 MPa. The riveted rolling-packed aluminum barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder.

This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular loads. It uses a heterogeneous two-way piston seal that retains grease for long service life, alongside a carbon-steel rod with 20 µm hard-chrome plating for wear and corrosion resistance. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke60 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT Is Used

package_2

Packaging Flap Folding

Drives the folding arms on a small packaging machine, using the 245 N push force and 60mm stroke to tuck cardboard flaps before sealing.

hardware

Hinge Positioning Jig

Pivots a small hardware alignment jig using its CA clevis back cover, absorbing angular movement while pushing parts into a press.

conveyor_belt

Diverter Gate Arc

Swings a lightweight diverter gate on a conveyor belt, leveraging the clevis mounting to arc the guide smoothly across the belt path.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT the Right Cylinder?

If you need less force, step down to the 20mm bore (157 N push @0.5 MPa); if your application requires more power, step up to the 32mm bore (402 N push @0.5 MPa). The base MBL relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion—choose the MBLC variant if you need screw-adjustable cushioning for heavier or faster moving loads.

Remember that a plain MBL does not hold its load when air pressure is lost or exhausted; the rod will drift or drop. Use an external rod lock or pilot-operated check valve if position holding is critical. Replacement match: 25mm bore, 60mm stroke, G1/8 port, NPT thread, CA pivot back cover, no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT FAQ

At 0.5 MPa it provides 245 N push and 206 N pull; at 0.7 MPa it provides 343 N push. The maximum theoretical force is 50 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.

No, this specific SKU lacks the -S suffix, meaning it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. You must select an MBL25X60SCA model if position detection is required.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X60CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X60CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.