
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X75SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X75SUT is a double-acting mini round cylinder engineered for tight machine spaces. It features a compact, riveted aluminum barrel and delivers 245 N of push force at 0.5 MPa. The built-in magnet (-S) allows for rod-position detection using CMSG reed or DMSG/EMSG electronic switches, ensuring precise automation control. The U flat-end back cover provides a rigid fixed mounting point for straightforward integration.
Inside this 25 mm bore unit, a heterogeneous two-way piston seal retains grease for long-lasting friction reduction. The Ø10 mm carbon-steel piston rod features 20 μm hard-chrome plating to resist wear and corrosion. End-of-stroke energy is absorbed by a fixed rubber bumper, which softens impact without adding bulk. The riveted rolling-packed construction keeps the body light and small, though it is not designed for field teardown like traditional tie-rod cylinders. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X75SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 245 N of push force at 0.5 MPa to drive axial leads into printed circuit boards, using the -S magnet to confirm full 75 mm extension.
Guides small packaging flaps on a compact folder-sealer where the 206 N pull force retracts the rod within tight conveyor clearances.
Pushes filled vial racks out of a diagnostic carousel, relying on the rigid U flat-end cover to absorb the 75 mm stroke impact via the fixed rubber bumper.
For applications needing less force, step down to the 20 mm bore (157 N push at 0.5 MPa). If your fixture requires more thrust, step up to the 32 mm bore (402 N push at 0.5 MPa). To replace this exact SKU, match the 25 mm bore, 75 mm stroke, G1/8 port, NPT thread, U flat-end back cover, and the -S magnet. If you need adjustable end-cushioning rather than the fixed rubber bumper, select the MBLC variant. Note that the MBL does not hold a load when air pressure is lost; the rod drifts when exhaust or valve centers. Use an external rod lock or pilot-operated check valve if gravity or load holding is required.
Quick checklist
At 0.5 MPa, the push force is 245 N and the pull force is 206 N. At 0.7 MPa, the push force reaches 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact. You must specify the MBLC variant if you require adjustable air cushioning for heavier or faster loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.