
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X80SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL25X80SCAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. Generating 245 N of push force and 206 N of pull force at 0.5 MPa, this 25 mm bore, 80 mm stroke unit handles compact actuation with ease. The built-in magnet (-S) enables direct rod-position detection using AirTAC CMSG reed or DMSG and EMSG solid-state sensor switches. A CA pivot back cover equips this specific SKU for arcing and angular load applications.
Unlike tie-rod bodies built for disassembly, the MBL features a riveted rolling-packed barrel that crimps the covers directly to the aluminum tube for an exceptionally light footprint. Internal longevity is driven by a heterogeneous two-way piston seal that actively retains grease, paired with a carbon-steel piston rod protected by 20 um hard-chrome plating to resist wear and corrosion. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a lightweight routing flap on a packaging line using its 245 N push force, while the CA pivot accommodates the arc of the swinging gate arm.
Delivers 206 N of pull force at 0.5 MPa to retract a small pick-and-place toolhead, fitting neatly into dense SMT machinery.
Lifts a compact access hatch on an automated dispensing unit, using the built-in magnet and a DMSG electronic sensor to confirm lid closure.
Select this 25 mm bore when an application requires 245 N of thrust at 0.5 MPa. If your task needs less force, step down to the 20 mm bore (157 N push); for heavier moves, step up to the 32 mm bore (402 N push). The CA pivot back cover on this model allows the cylinder body to swing on a pin, which is critical for arcing mechanisms or loads that change angle through the stroke. For applications requiring precise end-position tuning, the MBLC variant offers an adjustable air cushion instead of the standard fixed rubber bumper.
Keep in mind that a plain MBL does not hold its position or load when air pressure is lost or the valve is centered; the rod will drift or drop. The rubber bumper only softens the end-of-stroke impact and acts as no lock or brake. If a load must be held without live pressure, an external rod lock or pilot-operated check valve is required. Replacement matching requires a 25 mm bore, 80 mm stroke, G1/8 port size, NPT thread form, CA pivot back cover, and a built-in magnet.
Quick checklist
At 0.5 MPa, this 25 mm bore cylinder outputs 245 N push and 206 N pull. At 0.7 MPa, the push force increases to 343 N, with a theoretical maximum of 50 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact and cannot be adjusted. If your application requires adjustable air cushioning to handle heavier or faster moving loads, you should select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.