verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL25X80SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ25 mm
  • Stroke80 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$36.58 $44.08Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL25 stroke, mounting and version on one page All MBL25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT

The AirTAC MBL25X80SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a 245 N push and 206 N pull force at 0.5 MPa, making it well-suited for 80 mm stroke actuation tasks that require both compact dimensions and reliable mid-range thrust.

This specific SKU features a built-in magnet (-S) for position detection via AirTAC CMSG reed or DMSG/EMSG electronic switches. It uses a U-type flat-end rear cover for rigid mounting. The riveted rolling-packed barrel is permanently crimped, meaning it is not designed for field disassembly like a tie-rod cylinder. Inside, a heterogeneous two-way piston seal retains grease, while the carbon-steel rod features 20 µm hard-chrome plating to resist wear and corrosion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ25 mm
Stroke80 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N—
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT

MBLAluminum-barrel mini round cylinder, double acting.
25Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT Is Used

memory

PCB Depaneling Router

Pushes a 245 N pin to hold circuit boards firmly against a routing fixture during the 80 mm separation cut, fitting easily into dense electronics assembly machinery.

package

Carton Flap Folder

Actuates a compact folding arm to tuck minor packaging flaps on a narrow conveyor line, utilizing the rigid U-type back cover to maintain alignment.

biotech

Lab Tube Ejector

Extends 80 mm to eject filled centrifuge tubes from a testing carousel, relying on the DMSG electronic sensor to confirm the ejection stroke.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT the Right Cylinder?

If you need slightly less force, the neighbouring Ø20 bore provides 157 N push at 0.5 MPa; stepping up to the Ø32 bore yields 402 N push. This 80 mm stroke model uses a fixed rubber bumper to soften end-of-stroke impacts—choose the MBLC variant if your application requires adjustable air cushioning for heavier loads. Note that the MBL does not hold its position when air pressure is lost; use an external rod lock or pilot-operated check valve if drift is unacceptable. For exact replacement matching, verify the 25 mm bore, 80 mm stroke, G1/8 port, NPT thread form, U flat-end back cover, and the -S magnet requirement.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT FAQ

At 0.5 MPa, this 25 mm bore cylinder outputs 245 N push and 206 N pull. At 0.7 MPa, the push force increases to 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.

The base MBL uses a fixed rubber bumper, not an adjustable cushion screw; choose the MBLC variant if you need adjustable air cushioning. Because this SKU includes the -S magnet, it supports AirTAC CMSG (reed) and DMSG/EMSG (electronic) sensor switches for rod position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL25X80SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL25X80SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.