verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ32 mm
  • Stroke100 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$40.21 $47.71Save 15% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL32 stroke, mounting and version on one page All MBL32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT

The AirTAC MBL32X100SCAT is a double-acting aluminum mini round cylinder engineered for tight machine spaces where traditional profile bodies cannot fit. Operating at 0.5 MPa, it generates 402 N of push force and 346 N of pull force over a 100 mm stroke, making it well-suited for mid-range component transfer and actuation tasks. The riveted rolling-packed barrel design keeps the overall footprint exceptionally light and compact, though the crimped construction means it is intended as a sealed unit rather than a rebuildable tie-rod body.

This specific SKU includes a CA pivot (clevis) back cover that allows the cylinder body to swing freely on a pin, accommodating arcing or angular loads that would bind a rigidly mounted rear end. It also carries the -S suffix, meaning a built-in magnet is fitted for position detection via AirTAC CMSG (reed) or DMSG / EMSG (electronic solid-state) sensor switches. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the Ø12 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and surface corrosion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ32 mm
Stroke100 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT

MBLAluminum-barrel mini round cylinder, double acting.
32Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT Is Used

precision_manufacturing

CNC Lathe Bar Feeder

Swings on its CA pivot to index and push 402 N of raw bar material into the lathe collet, fitting neatly within the tight clearance of the machine's feeder headstock.

inventory_2

Packaging Carton Flap Folder

Uses its 100 mm stroke and 346 N pull force to fold corrugated cardboard side flaps during case erecting, where the clevis mount absorbs the angular misalignment of moving conveyor parts.

memory

PCB Router Component Ejector

Kicks out routed printed circuit board panels with precise 100 mm travel, relying on the -S magnet and a DMSG solid-state switch to confirm ejection to the PLC.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT the Right Cylinder?

At 0.5 MPa, this 32 mm bore provides 402 N of push force. If your application requires less force, stepping down to the 25 mm bore yields 245 N of push force, while stepping up to the 40 mm bore provides 628 N for heavier payloads. Because this base MBL features a fixed rubber bumper rather than an adjustable air cushion, you should select the MBLC variant if your 100 mm stroke demands softer, screw-adjustable end-of-travel deceleration for heavier moving masses. If you need spring-return single-acting operation, the MSBL (push) or MTBL (pull) variants cover the 20-40 mm bore range.

When matching replacement parts, verify the 32 mm bore, 100 mm stroke, G1/8 port size, default NPT port thread, CA pivot back cover, and the -S built-in magnet. Note that a plain MBL does not hold its load if air pressure is lost or the valve is centered; the rod will drift. For safety during pneumatic drop, an external rod lock or pilot-operated check valve is required.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT FAQ

This genuine AirTAC cylinder uses a Ø12 mm rod with an M10x1.25 rod-end thread. The theoretical force output is 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa.

No, the base MBL series uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable cushion screw. If your application requires adjustable air cushioning for heavier loads or faster speeds, you must step up to the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL32X100SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.