
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X100UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X100UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It provides 402 N of push force and 346 N of pull force at 0.5 MPa, making it well-suited for 100 mm linear positioning tasks in light assembly equipment. The riveted rolling-packed barrel permanently crimps the front and rear covers to the tube, yielding a lightweight footprint that is not designed to be disassembled like a heavy tie-rod cylinder.
This specific SKU features a rigid U flat-end back cover for direct rear mounting. The Ø12 mm carbon-steel piston rod is treated with a 20 µm hard-chrome plating to resist wear and corrosion, while a heterogeneous two-way piston seal retains internal grease for a long service life. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable air cushion (found on the MBLC variant), and the cylinder will not hold a load if air pressure is lost. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X100UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 100 mm vertical stroke on a light PCB depaneling router, utilizing 402 N of push force to plunge the spindle through FR4 fiberglass material.
Actuates a 100 mm mechanical arm to tuck minor flaps on small packaging cartons, relying on the rigid U flat-end rear cover for stable foot mounting.
Pushes a 100 mm pin to eject filled microcentrifuge tubes from a filling block, benefiting from the 20 µm chrome-plated rod for corrosion resistance.
If your application requires less force, step down to the MBL25 bore, which yields 245 N of push force at 0.5 MPa. If you need more power, step up to the MBL40, which provides 628 N at 0.5 MPa. The base MBL uses a fixed rubber bumper to soften end impacts; if your cycle requires heavier dynamic energy absorption, select the MBLC variant for its adjustable air cushion. For applications needing spring-return action, consider the MSBL or MTBL single-acting versions.
Replacement matching requires a 32 mm bore, 100 mm stroke, G1/8 port, NPT thread form, and the U flat-end back cover. Because this SKU has no -S magnet, a position sensor cannot be fitted. Note that a plain MBL does not function as a rod lock; it drifts when air is exhausted, so an external pilot-operated check valve is required to hold loads safely. At a 100 mm stroke, side-load tolerance remains manageable, but always ensure rigid front mounting to prevent rod-bearing bending.
Quick checklist
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. The rod diameter is Ø12 mm with an M10x1.25 rod-end thread.
No, this specific SKU lacks the -S suffix, meaning it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. Additionally, it uses a fixed rubber bumper for end-of-stroke deceleration; you must upgrade to the MBLC variant to get an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.