
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X150SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X150SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 402 N of push force and 346 N of pull force, making it well-suited for mid-range 150 mm actuation tasks. The riveted rolling-packed barrel design keeps the body light and small, though it is not built to be disassembled like a tie-rod cylinder. This U flat-end configuration provides a rigid rear mounting surface for straightforward fixed installations.
This specific SKU includes a built-in magnet (-S) for non-contact position detection using AirTAC CMSG reed or DMSG/EMSG electronic sensor switches. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. To ensure long service life, the Ø12 mm carbon-steel piston rod features 20 µm hard-chrome plating, and a heterogeneous two-way piston seal continually retains grease during operation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X150SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 402 N of push force at 0.5 MPa to actuate the routing spindle or fixture on an automated PCB depaneling machine, fitting neatly within the tight electronics assembly cell.
Drives a mechanical arm to fold minor carton flaps on a continuous flow packaging conveyor, utilizing the 150 mm stroke to clear the product path during retraction.
Applies precise downward force to press and seal caps on centrifuge tubes in a laboratory automation line, with the -S magnet confirming the cap is fully driven home.
If you need less force, step down to the 25 mm bore (245 N push @0.5 MPa); if your application demands more power, step up to the 40 mm bore (628 N push @0.5 MPa). For higher kinetic energy moves, the MBLC variant offers an adjustable air cushion instead of the standard fixed rubber bumper. Because this is a 150 mm stroke, the unsupported Ø12 mm rod is susceptible to bending under side loads—use an external guide or switch to the MBLD double-rod type to prevent premature wear. Note that the fixed rubber bumper only softens impact and does not lock the rod; this cylinder cannot hold a load if air pressure is lost or the valve is centered. Replacement match: 32 mm bore, 150 mm stroke, G1/8 port, NPT thread, U flat-end back cover, no mounting accessory, magnet included.
Quick checklist
This 32 mm bore cylinder uses a Ø12 mm carbon-steel rod with an M10x1.25 rod-end thread and a G1/8 port. It delivers 402 N push / 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impacts and cannot be adjusted. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.