
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X25-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X25-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 32mm bore and 25mm stroke, it generates 402N of push force and 346N of pull force at 0.5 MPa. This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular load paths.
Unlike tie-rod ISO 6432 bodies, this unit uses a riveted rolling-packed aluminum barrel that is permanently crimped for maximum lightness, meaning it cannot be disassembled for internal rebuilds. It relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. Because this specific SKU lacks the -S suffix, it has no internal magnet and cannot support a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X25-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a short 25mm routing stroke on a printed circuit board depaneling gantry, where the 402N push force cleanly shears connection tabs without over-stressing the surrounding substrate.
Pivots a yarn guide arm through a gentle arc using the CA clevis back cover, maintaining proper thread tension in a compact weaving loom where a rigid mount would bind.
Folds small cardboard flaps on a packaging line, utilizing the short 25mm stroke and 346N pull force to quickly tuck minor-box tabs before the sealing station.
If your assembly needs less force, step down to the 25mm bore which yields 245N push at 0.5 MPa; if you need more power, step up to the 40mm bore which provides 628N push. The CA pivot mount is ideal here for angular movements, but if you need adjustable end-cushioning for heavier moving masses, switch to the MBLC variant. Remember that a plain MBL will drift or drop if air pressure is lost, as the rubber bumper is not a locking brake. For exact replacements, match the 32mm bore, 25mm stroke, G1/8 port, NPT thread, CA back cover, and no magnet.
Quick checklist
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 346N of pull force. At 0.7 MPa, the push force increases to 563N. The maximum theoretical force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the -S suffix, meaning it has no built-in magnet and cannot accept a CMSG, DMSG, or EMSG sensor switch. You must select an MBL32X25S-CA model if position detection is required.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.