verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ32 mm
  • Stroke300 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$44.64 $52.14Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL32 stroke, mounting and version on one page All MBL32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT

The AirTAC MBL32X300-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it generates 402 N of push force and 346 N of pull force across its 300 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, yielding a lightweight footprint that is not designed to be disassembled like a traditional tie-rod body.

This specific SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing and angular loads. Because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. The carbon-steel piston rod features a 20 um hard-chrome plating to resist wear, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ32 mm
Stroke300 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT

MBLAluminum-barrel mini round cylinder, double acting.
32Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT Is Used

conveyor_belt

Pallet Diverter Arm

Swings lightweight routing gates on a 300 mm radius to redirect flat-bottomed pallets on a packaging conveyor, utilizing the CA pivot to absorb the angular arc.

precision_manufacturing

Textile Yarn Guide

Traverses a thread guide carriage across a 300 mm span in a loom, where the compact riveted barrel fits within narrow machine columns and the 402 N force easily overcomes friction.

inventory_2

Bin Push-Out Mechanism

Ejects small plastic component bins from a multi-level storage shelf, relying on the pivot mount to self-align as the bin drops slightly during the 300 mm ejection stroke.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT the Right Cylinder?

Stepping down to the 25 mm bore drops the output to 245 N push at 0.5 MPa, while stepping up to the 40 mm bore increases it to 628 N. This 32 mm model uses a G1/8 port, a Ø12 mm rod with an M10x1.25 thread, and a NPT thread form. If your application requires adjustable end-of-stroke deceleration for heavier moving masses, select the MBLC variant instead of the base MBL.

At 300 mm of stroke, the unsupported Ø12 mm rod is highly susceptible to bending under side loads. The CA clevis mount on this unit helps safely absorb angular forces, but you should still use an external guide or consider the MBLD double-rod type for strict anti-rotation. Note that the fixed rubber bumper only softens end-of-stroke impact; a plain MBL cannot hold a load if air pressure drops, so fit an external rod lock for fail-safe positioning.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT FAQ

At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

The base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion (you would need the MBLC variant for that). Additionally, because this SKU lacks the -S suffix, a position sensor cannot be fitted; order an MBL32X300-S-CA if you require CMSG, DMSG, or EMSG switch integration.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL32X300-CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL32X300-CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.