
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X30SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X30SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It generates 402 N of push force and 346 N of pull force at 0.5 MPa, making it well-suited for short 30 mm actuation tasks. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder. A heterogeneous two-way piston seal retains grease internally for long service life.
This specific SKU includes a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. It also features a built-in magnet (-S) for position detection via CMSG, DMSG, or EMSG sensor switches. The Ø12 mm carbon-steel rod features 20 µm hard-chrome plating for wear and corrosion resistance. End-of-stroke energy is absorbed by a fixed rubber bumper rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X30SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a short 30 mm plunge on a PCB depaneling router, using the 402 N push force to lower the cutting bit precisely into the board.
Actuates a pivoting flap mechanism on a vertical form-fill-seal machine, leveraging the CA clevis mount to swing the gate and divert filled pouches.
Ejects processed microtiter plates from a centrifuge carousel, using the DMSG electronic sensor to confirm the 30 mm retraction stroke before the rotor spins.
If you need slightly less force, the MBL25 variant provides 245 N of push at 0.5 MPa, while stepping up to the MBL40 yields 628 N for heavier loads. Because this cylinder uses a fixed rubber bumper, choose the MBLC variant if your application requires an adjustable air cushion for faster cycling or heavier moving masses. Keep in mind that a plain MBL does not hold its load when air pressure is lost or exhausted; the rod will drift. Use an external rod lock or pilot-operated check valve if position holding is critical.
This exact configuration matches a 32 mm bore, 30 mm stroke, G1/8 port, NPT thread, CA pivot back cover, and an integrated magnet. The short 30 mm stroke keeps side-load stress minimal, but always ensure the CA clevis pin is aligned to prevent rod-bearing wear.
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It has a 30 mm stroke and operates at speeds of 30-800 mm/s.
No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impacts and cannot be adjusted. If your application requires adjustable air cushioning for heavier loads or faster speeds, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.