
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X350SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X350SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a push force of 402 N and a pull force of 346 N at 0.5 MPa, making it well-suited for mid-range actuation across a 350 mm travel distance. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating a lightweight footprint that is not designed to be disassembled like a traditional tie-rod body.
This specific SKU includes a built-in magnet (-S) for rod position detection via AirTAC CMSG (reed) or DMSG and EMSG (electronic) sensor switches. It also features a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. The carbon-steel piston rod is plated with 20 um of hard chrome for wear resistance, while the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X350SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Swings a lightweight routing flap on a packaging conveyor using the 350 mm stroke and CA pivot bracket to accommodate the arc of the moving gate.
Traverses a yarn guide carriage across a 350 mm width, relying on the 402 N push force and the DMSG electronic sensor for precise edge positioning.
Pushes corrugated cartons off a gravity roller track, utilizing the compact aluminum body to fit within narrow conveyor framework.
For applications needing less force, step down to the 25 mm bore, which provides 245 N of push force at 0.5 MPa. If your fixture requires more thrust, step up to the 40 mm bore, offering 628 N at 0.5 MPa. Choose the MBLC variant if your payload requires adjustable air cushioning to soften end-of-stroke impacts, or the MSBL/MTBL models for single-acting push or pull operations.
With a 350 mm stroke, the 12 mm rod is highly susceptible to bending under side loads; always use an external guide rail alongside the CA pivot back cover to prevent rod-bearing damage. Note that the fixed rubber bumper softens end-of-stroke impact but does not act as a lock. If the load must be held without live air pressure, install an external pilot-operated check valve. Direct replacement parameters: 32 mm bore, 350 mm stroke, G1/8 port, NPT thread, CA back cover, and -S magnet.
Quick checklist
At 0.5 MPa it provides 402 N push and 346 N pull. At 0.7 MPa the push force increases to 563 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
No, the base MBL features a fixed rubber bumper to soften end-of-stroke impact, not an adjustable cushion screw. If you need adjustable air cushioning for heavier 350 mm stroke payloads, select the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.