
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL32X60SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL32X60SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 402 N push force at 0.5 MPa, making it well-suited for mid-range clamping and ejection tasks over its 60 mm stroke. The riveted rolling-packed barrel keeps the overall footprint small and lightweight, though the crimped construction means it is not designed to be disassembled and rebuilt like a traditional tie-rod cylinder.
This specific SKU includes a U flat-end back cover for rigid, fixed mounting and a built-in magnet (-S) for non-contact position detection. The magnet is fully compatible with AirTAC CMSG reed switches, as well as DMSG and EMSG electronic solid-state sensors. Internally, a heterogeneous two-way piston seal retains grease for long service life, while the carbon-steel piston rod features 20 µm hard-chrome plating for excellent wear and corrosion resistance. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL32X60SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Providing 402 N of push force at 0.5 MPa, this 60 mm stroke cylinder reliably knocks small plastic parts out of tight injection mold cavities where space is highly restricted.
The built-in magnet pairs with DMSG solid-state sensors to confirm clamping pressure on delicate circuit boards, while the U flat-end cover ensures a rigid, zero-flex rear mount.
A compact 32 mm bore body easily fits between conveyor rails to actively fold secondary packaging flaps, using its 346 N pull force to retract quickly in double-acting mode.
If you need less force, stepping down to the 25 mm bore yields 245 N of push force at 0.5 MPa, while moving up to the 40 mm bore provides 628 N. Because this base MBL uses a fixed rubber bumper rather than an adjustable air cushion, choose the MBLC variant if your application involves heavier moving masses that require end-of-stroke deceleration tuning. For single-direction spring-return tasks, consider the MSBL or MTBL single-acting models.
This cylinder features a G1/8 port, a Ø12 mm rod with an M10x1.25 rod-end thread, a NPT port thread form, and a U flat-end back cover. Note that the fixed rubber bumper only softens end-stroke impact; it does not act as a lock. If the load must be held in place without live air pressure, you must integrate an external rod lock or a pilot-operated check valve to prevent drifting or dropping.
Quick checklist
This 32 mm bore cylinder provides 402 N push and 346 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the base MBL32X60SUT uses a fixed rubber bumper to soften end-of-stroke impact and cannot be adjusted. If you need tunable deceleration for heavier loads, you must select the MBLC variant, which features an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.