
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X125UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 125mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X125UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 628 N of push force and 528 N of pull force over a 125 mm stroke, making it well-suited for mid-range actuation tasks. The U suffix designates a rigid flat-end rear cover for stable, fixed mounting.
Unlike ISO 6432 stainless steel bodies, this unit features a riveted rolling-packed aluminum barrel that is permanently crimped, prioritizing a small footprint over field-rebuildability. The carbon steel piston rod is treated with 20 um hard-chrome plating for wear and corrosion resistance, while a heterogeneous two-way piston seal retains grease for extended operational life. Because this specific SKU lacks the -S magnet suffix, it cannot support a CMSG, DMSG, or EMSG position sensor switch. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X125UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates the tool carousel in CNC PCB drilling spindles, using its 628 N push force to positively lock the tool holder in the spindle nose.
Folds minor flaps on packaging lines, where the 125 mm stroke clears the carton width and the rigid U flat-end cover mounts directly to the side rail.
Pushes M.2 edge connectors into motherboard sockets during electronics assembly, relying on the 528 N pull force to retract the insertion head.
For lower force needs, stepping down to the 32 mm bore yields 402 N of push force at 0.5 MPa, while moving up to the 50 mm bore provides 981 N for heavier payloads. If your cycle speed demands end-of-stroke deceleration, select the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion. Should your application require the rod to stay in place after a loss of air pressure, note that this base MBL model will drift or drop its load; an external rod lock or pilot-operated check valve is required for position holding.
With a 125 mm stroke, the 16 mm rod is moderately exposed; for longer unsupported moves, side-load tolerance remains low, so utilizing an external guide rail or switching to an MBLD double-rod cylinder is recommended to prevent rod-bearing bending. Replacement matching requires a 40 mm bore, 125 mm stroke, G1/4 port, NPT thread, U back cover, and no magnet.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder outputs 628 N of push force and 528 N of pull force. At 0.7 MPa, push force increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.
No, the base MBL40X125UT uses a fixed rubber bumper to soften end-of-stroke impacts, not an adjustable cushion screw. If your application requires adjustable air cushioning for heavier or faster moving loads, you must specify the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.