verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 160mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke160 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$55.60 $63.10Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT

The AirTAC MBL40X160SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where a larger profile body will not fit. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, making this 40 mm bore, 160 mm stroke unit well-suited for mid-range positioning tasks. The riveted rolling-packed barrel crimps the front and back covers directly to the aluminum tube, ensuring a lightweight, space-saving assembly that is permanently sealed rather than bolted together.

This specific SKU features a CA pivot back cover that allows the cylinder body to swing freely on a pin, accommodating arcing or angular loads during the 160 mm travel. Because it carries the -S suffix, a built-in magnet enables position detection using AirTAC CMSG (reed), DMSG, or EMSG (electronic) sensor switches. The carbon-steel piston rod is hardened with a 20 um chrome plating to resist wear and corrosion, while the internal heterogeneous two-way piston seal retains grease for a long, maintenance-free service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke160 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×160Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT Is Used

precision_manufacturing

Textile Loom Tensioning

Swings on a pivot pin to maintain consistent fabric tension across a 160 mm travel arc, using its 628 N push force to guide material through weaving machinery without binding.

conveyor_belt

Package Divert Arm

Actuates a pivoting deflector gate on a packaging line, where the CA clevis mount absorbs lateral shock and the compact riveted body fits within tight transfer conveyor frames.

memory

PCB Router Positioning

Drives a routing head across 160 mm to trace circuit board outlines, utilizing the -S magnet and a DMSG solid-state switch to confirm end-of-stroke position for the CNC controller.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT the Right Cylinder?

If your application requires less force, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa; conversely, moving up to the 50 mm bore provides 981 N for heavier payloads. This 160 mm stroke length pushes the limits of the Ø16 mm rod, meaning side-load tolerance is low. For an unsupported span of this length, you should use an external guide rail to prevent rod-bearing bending, rely on the CA pivot back cover to absorb angular misalignment, or switch to the MBLD double-rod type for rigid anti-rotation. Remember that the fixed rubber bumper only softens end-of-stroke impact; it does not hold the load. If air pressure drops, the rod will drift, so fit an external pilot-operated check valve if position holding is critical. For exact replacement matching, confirm: 40 mm bore, 160 mm stroke, G1/4 port, NPT thread, CA pivot back cover, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT FAQ

At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. Increasing the pressure to 0.7 MPa yields 880 N of push force. The maximum theoretical force is 128 kgf at 1.0 MPa, which is the upper operating pressure limit for this model.

No, the base MBL40X160SCAT uses a fixed rubber bumper to soften the impact at the end of the stroke, not an adjustable cushion screw. If your application requires precise end-of-stroke deceleration for heavier moving loads, you should upgrade to the MBLC variant which features adjustable air cushioning.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X160SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X160SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.