
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X175SCAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 175mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X175SCAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 628 N push force at 0.5 MPa, making it well-suited for 175 mm stroke actuation tasks that require substantial push and pull power. The riveted rolling-packed barrel keeps the body light and sealed permanently, meaning it is not designed to be disassembled or rebuilt like a heavy tie-rod cylinder.
This specific SKU includes a built-in -S magnet for CMSG, DMSG, or EMSG sensor switches, allowing precise end-of-stroke detection. It also features a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. The carbon-steel piston rod features a 20 um hard-chrome plating for high wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X175SCAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Leverages the 628 N push force and CA pivot back cover to maintain consistent fabric tension on a weaving loom, absorbing angular movement during high-speed operation.
Uses the 175 mm stroke to push parcels onto adjacent chutes, relying on the -S magnet and DMSG electronic sensor to confirm diversion before the belt advances.
Acts as a compact 40 mm bore stopper on a packaging line, using its 528 N pull force to retract the gate and allow pallet flow without occupying excessive frame space.
Selecting this 40 mm bore model provides 628 N push at 0.5 MPa. If you need less force, stepping down to the 32 mm bore yields 402 N push; if your application demands more power, the 50 mm bore provides 981 N push. Because this 175 mm stroke is substantial for a mini cylinder, the relatively small Ø16 rod has limited side-load tolerance—an external guide or the CA pivot back cover on this SKU is essential to prevent rod-bearing bending under lateral stress.
Note that the base MBL uses a fixed rubber bumper to soften end-of-stroke impact, not an adjustable air cushion (for adjustable cushioning, choose the MBLC variant). Furthermore, this cylinder does not hold its position if air pressure is lost; the rod will drift or drop. If load holding is required without live pressure, integrate an external rod lock or a pilot-operated check valve. This exact replacement matches: 40 mm bore, 175 mm stroke, G1/4 port, NPT thread, CA pivot back cover, and an -S magnet.
Quick checklist
This 40 mm bore cylinder provides a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force increases to 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This model includes a -S magnet for mounting CMSG (reed) or DMSG/EMSG (electronic) sensor switches. However, it uses a fixed rubber bumper for end-of-stroke cushioning, which is not adjustable. If your application requires adjustable air cushioning to absorb heavier kinetic energy, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.