
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X250-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X250-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where larger profile cylinders cannot fit. It delivers a robust 628 N push force and 528 N pull force at 0.5 MPa, making this 250 mm stroke variant well-suited for mid-range linear actuation tasks. The riveted rolling-packed barrel permanently crimps the front and rear covers to the extruded tube, yielding a lightweight body that is not designed to be disassembled or rebuilt like a traditional tie-rod cylinder.
This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to accommodate arcing or angular loads during the stroke. Because this configuration lacks the -S suffix, it has no internal magnet and cannot be fitted with a CMSG, DMSG, or EMSG position sensor switch. The carbon-steel piston rod is hardened with a 20 um chrome plating to resist wear and corrosion, while the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X250-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides the 628 N push force needed to fold heavy corrugated cardboard flaps on continuous-motion packaging lines, utilizing the 250 mm stroke to clear the machine frame during retraction.
Swings a sorting arm on a package conveyor where the CA pivot back cover absorbs the angular load as the arm redirects parcels, fitting easily within the narrow side-frame gap.
Shifts a yarn guide carriage across a weaving loom; the 250 mm travel positions the guide while the fixed rubber bumper quietly absorbs the repetitive end-of-stroke impact.
If you need slightly less force, the neighbouring MBL32 bore provides 402 N of push force at 0.5 MPa; stepping up to the MBL50 bore yields 981 N for heavier payloads. The base MBL uses a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion—if you need precise end-speed control for heavier moving masses, select the MBLC variant instead. Remember that a standard cylinder does not hold its position or load when air pressure is lost or the valve is centered—the rod will drift or drop, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
At a 250 mm stroke, the Ø16 mm piston rod is highly susceptible to bending under lateral side loads. To manage this, leverage the CA pivot back cover paired with an SDB pivot bracket to prevent rod bearing wear, or use an external guide rail. For applications requiring strict anti-rotation, consider the MBLD double-rod variant. Replacement match: 40 mm bore, 250 mm stroke, G1/4 port size, NPT thread form, CA pivot back cover, no magnet.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
No, because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG sensor switches. You must select an MBL40X250S variant to enable electronic or reed switch position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.