
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X250SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X250SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 628 N of push force at 0.5 MPa over a 250 mm stroke, making it well-suited for mid-range linear actuation. The riveted rolling-packed barrel crimps the covers directly to the tube, yielding a lightweight footprint that is not designed to be disassembled like a tie-rod body.
This SKU includes a U flat-end back cover for rigid rear mounting and a built-in -S magnet. The magnet enables contactless position detection via AirTAC CMSG (reed) or DMSG and EMSG (solid-state) sensor switches. It relies on a fixed rubber bumper to soften end-of-stroke impacts, rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X250SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates a 250 mm routing gate at 628 N push force to deflect parcel traffic on a tight 40 mm bore footprint.
Drives a 250 mm squeegee stroke for automated stencil cleaning, using the -S magnet to trigger the DMSG sensor at stroke end.
Folds heavy corrugated flaps with 880 N of thrust at 0.7 MPa, relying on the rigid U flat-end back cover for stable mounting.
If you need less force, the 32 mm bore neighbor provides 402 N push at 0.5 MPa; stepping up to the 50 mm bore yields 981 N. The base MBL uses a fixed rubber bumper, so choose the MBLC variant if your application requires adjustable air cushioning for heavier moving masses. Because this is a 250 mm stroke on a Ø16 mm rod, external side-load guidance is recommended to prevent rod bearing bending. This cylinder cannot hold a load if air pressure drops; add an external pilot-operated check valve for position retention. Replacement match: 40 mm bore, 250 mm stroke, G1/4 port, NPT thread, U back cover, -S magnet.
Quick checklist
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa push is 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa, operating between 0.15 and 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact. You must upgrade to the MBLC variant for adjustable air cushioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.