
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X250UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 250mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X250UT is a double-acting aluminum mini round cylinder engineered for compact machinery. It generates 628 N of push force and 528 N of pull force at 0.5 MPa, utilizing a 250 mm stroke to move small jigs or actuators across automated stations. The rigid U flat-end back cover provides a solid fixed mounting footprint, ideal for straight-line transfer tasks where rear pivot swing is unnecessary.
Built with a riveted rolling-packed barrel, the front and back covers are permanently crimped to the tube, yielding a lightweight body that is not designed to be disassembled like traditional tie-rod cylinders. Internal longevity is driven by a heterogeneous two-way piston seal that retains grease, while the Ø16 mm carbon steel piston rod features 20 µm hard-chrome plating for wear and corrosion resistance. Because this specific SKU lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X250UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Delivers 628 N of push force at 0.5 MPa to pivot lightweight cardboard carton diverters along a 250 mm travel path within cramped packaging line clearances.
Extends test probes into fixture sockets over a 250 mm stroke, using the rigid U flat-end rear to maintain strict perpendicular alignment without rear pivot play.
Pushes molded plastic components out of press cavities, relying on the 528 N pull force to positively retract the 40 mm bore rod out of the mold area.
Stepping down to the 32 mm bore drops the 0.5 MPa push force to 402 N, whereas stepping up to the 50 mm bore increases it to 981 N, providing a clear upgrade path if your payload shifts. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts; if your 250 mm move carries a heavy mass at high speed, choose the MBLC variant for its adjustable air cushion. Note that a plain MBL will drift or drop if air pressure is lost, as the bumper is not a locking mechanism—an external rod lock or pilot-operated check valve is required to hold suspended loads safely.
With a 250 mm stroke on a Ø16 mm rod, the unsupported length is highly susceptible to side-load bending. To prevent rod-bearing wear, mount an external linear guide, or switch to the MBLD double-rod cylinder for anti-rotation support. Replacement parts must match the 40 mm bore, 250 mm stroke, G1/4 port size, NPT thread form, and U flat-end cover.
Quick checklist
At 0.5 MPa, the 40 mm bore provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force reaches 880 N. The theoretical maximum force is 128 kgf at 1.0 MPa.
No, the base MBL40X250UT uses a fixed rubber bumper to absorb end-of-stroke impact, not an adjustable cushion screw. For adjustable air cushioning, you must specify the MBLC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.