verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X25UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 25mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke25 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$44.11 $51.61Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT

The AirTAC MBL40X25UT is a double-acting aluminum mini round cylinder engineered for tight machine spaces where compact footprint matters more than ISO interchangeability. With a 40mm bore and 25mm stroke, it generates 628N push and 528N pull force at 0.5MPa, making it a solid choice for short-travel clamping and ejection tasks. The U flat-end back cover provides a rigid fixed rear mounting surface for straightforward dead-end installation.

This SKU has no built-in magnet, so it cannot carry a CMSG, DMSG or EMSG position sensor. The riveted rolling-packed barrel crimps the covers to the tube for light weight, but the body is not designed to be disassembled like a tie-rod cylinder. A heterogeneous two-way piston seal retains grease for long service life, while the carbon-steel rod with 20um hard-chrome plating resists wear and corrosion. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke25 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT Is Used

precision_manufacturing

Injection Mold Ejection

Provides 628N of push force at 0.5MPa to eject small plastic parts from injection molds where a 25mm stroke is sufficient for the stripper plate.

conveyor_belt

Packaging Line Diverter

Short 25mm travel diverts lightweight cartons on a packaging conveyor, fitting into the narrow 40mm frame gap between belt rollers.

memory

PCB Test Fixture Clamp

Applies 528N pull force at 0.5MPa to hold a printed circuit board firmly against electrical test pins in a compact automated test fixture.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT the Right Cylinder?

If you need less force, the next size down is the 32mm bore (402N push at 0.5MPa); if you need more power, step up to the 50mm bore (981N push at 0.5MPa). Because this base MBL uses a fixed rubber bumper rather than an adjustable air cushion, choose the MBLC variant if your short-stroke ejection creates heavy end-of-travel impacts that need screw-adjustable deceleration. The NPT tapered port thread is the default. As a double-acting cylinder, this model does not hold its load if air pressure is lost or the valve is centered—the rod will drift. Use an external rod lock or pilot-operated check valve if the load must be held safely without live pressure.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT FAQ

At 0.5MPa the push force is 628N and the pull force is 528N. At 0.7MPa the push force is 880N. The maximum theoretical force is 128kgf at 1.0MPa.

No. The MBL40X25UT lacks the -S suffix, meaning it has no built-in magnet. You must select an -S variant if you need to mount a CMSG, DMSG or EMSG sensor switch for rod position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X25UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X25UT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.