
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X30-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 30mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X30-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It generates 628 N of push force and 528 N of pull force at 0.5 MPa, making it highly effective for short 30 mm actuation tasks. The riveted rolling-packed barrel keeps the body light and permanently sealed, prioritizing a small footprint over rebuildable tie-rod designs. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the carbon steel rod features 20 um hard-chrome plating to resist wear and corrosion.
This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to safely accommodate arcing or angular loads during motion. As a base MBL model, end-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable air cushion. Note that because this configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 628 N of clamping thrust at 0.5 MPa to secure steel brackets during CNC machining, using the short 30 mm stroke and CA pivot to accommodate slight arm geometry shifts.
Swings a routing flap on a packaging line conveyor; the CA clevis absorbs side-load as the flap pivots, while the compact riveted aluminum body fits within the tight 40 mm frame clearance.
Drives a 30 mm stroke to press an electrical test probe head onto printed circuit boards, relying on the grease-retaining two-way piston seal for millions of reliable cycles.
If your application requires less force, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa. Conversely, moving up to the 50 mm bore provides 981 N of push force for heavier demands. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes. To replace this exact unit, match the 40 mm bore, 30 mm stroke, CA pivot back cover, and default NPT thread. Because the stroke is only 30 mm, side-load stress on the 16 mm rod is minimal, though the CA clevis already provides excellent angular compliance.
This cylinder uses a fixed rubber bumper to soften end-of-stroke impact. It is not a locking device; the rod will drift and drop if air pressure is lost or the valve is centered. To hold a load safely without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder outputs 628 N push and 528 N pull. At 0.7 MPa, push increases to 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. It uses a fixed rubber bumper for end-of-stroke impact absorption, not an adjustable air cushion (which requires the MBLC variant).
No. Because this specific SKU lacks the -S suffix, it does not have a built-in magnet and cannot support CMSG, DMSG, or EMSG electronic position switches. You must select an MBL40X30S-CA variant to enable rod-position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.