
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X300SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X300SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 628 N push force at 0.5 MPa (880 N at 0.7 MPa) across a 300 mm stroke, utilizing a G1/4 port and a Ø16 mm carbon-steel rod with hard-chrome plating for wear resistance. The U flat-end rear cover provides a rigid mounting base for straightforward fixed installations.
This SKU includes a built-in magnet (-S) for position detection via AirTAC CMSG (reed) or DMSG and EMSG (solid-state) sensor switches. The body features a riveted rolling-packed barrel where the covers are crimped to the tube, ensuring a lightweight footprint but meaning the unit is not designed to be disassembled or rebuilt like a tie-rod cylinder. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X300SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Pushes lightweight conveyor pallets laterally across a 300 mm gap, utilizing the 628 N push force to overcome sliding friction without requiring a full-size ISO cylinder.
Extends a routing flap to divert defective printed circuit boards out of the main production line, using the -S magnet to confirm gate open/closed status for the PLC.
Sweeps secondary packaging carton flaps inward prior to tape sealing, where the compact riveted aluminum body fits neatly between adjacent conveyor guide rails.
Selecting the MBL40X300SUT suits applications needing 628 N of push force at 0.5 MPa within a compact envelope. If your load is lighter, stepping down to the 32 mm bore yields 402 N push, while moving up to the 50 mm bore provides 981 N for heavier payloads. Because this 300 mm stroke uses a Ø16 mm rod, it has low side-load tolerance; long unsupported strokes risk rod-bearing bending, so an external guide or a CA pivot back cover is recommended to manage arcing loads.
This cylinder uses a fixed rubber bumper to soften end impacts, so for faster cycling or heavier moving masses, step up to the MBLC variant which features adjustable air cushioning. Note that the rubber bumper is not a locking device; if the load must be held in place when air pressure is lost or the valve is centered, you must fit an external rod lock or a pilot-operated check valve. Replacement matches: 40 mm bore, 300 mm stroke, G1/4 port, NPT thread, U flat-end back cover, and an -S magnet.
Quick checklist
At 0.5 MPa this 40 mm bore cylinder provides 628 N push and 528 N pull force. At 0.7 MPa the push force increases to 880 N, with a theoretical maximum of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
The base MBL uses a fixed rubber bumper to absorb end-of-stroke impact and cannot be adjusted; for adjustable air cushioning, choose the MBLC variant. Additionally, the bumper is not a brake, so the rod will drift if air pressure is lost, requiring an external rod lock to hold a load safely.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.