
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X300UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 300mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X300UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa, making it well-suited for driving heavier slides over its 300 mm stroke. The riveted rolling-packed barrel keeps the body light and permanently sealed, though it is not designed to be disassembled like a tie-rod cylinder. This specific SKU features a U flat-end back cover for rigid fixed mounting.
Inside, a heterogeneous two-way piston seal retains grease for long service life, while the carbon-steel piston rod is hardened with 20 um chrome plating to resist wear and corrosion. End-of-stroke impact is absorbed by a fixed rubber bumper rather than an adjustable cushion. Because this model lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X300UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates heavy cardboard case diverters on packaging lines, using the 628 N push force to reliably push parcels at high cycle rates within confined conveyor frames.
Drives the pusher carriage in an automatic bar feeder, utilizing the 300 mm stroke to load raw steel workpieces into the spindle while fitting into the machine's tight rear footprint.
Raises and lowers multi-level storage lift gates in automated retrieval systems, where the rigid U flat-end rear mount secures the cylinder body solidly to the lift chassis.
This 40 mm bore provides 628 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push force. If you need more power, stepping up to the 50 mm bore offers 981 N. For applications needing deceleration control at the end of this long 300 mm stroke, select the MBLC variant which features an adjustable air cushion instead of the fixed rubber bumper.
With a 300 mm stroke, the unsupported Ø16 mm rod is highly susceptible to side-load bending. To prevent premature wear, use an external guide rail, pivot the load, or switch to the MBLD double-rod cylinder for anti-rotation. Note that this standard double-acting cylinder does not hold its load if air pressure is lost; a separate pilot-operated check valve or external rod lock is required for drop protection.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
No. Because this SKU lacks the -S suffix, it does not have a built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. You must select an MBL40X300S model to enable position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.