verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X30UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 30mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke30 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$45.05 $52.55Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT

The AirTAC MBL40X30UT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. With a 40mm bore and 30mm stroke, it generates 628 N of push force and 528 N of pull force at 0.5 MPa, making it a robust choice for short-travel clamping and ejection. The U suffix denotes a rigid flat-end rear cover that mounts flush against machine frames to handle straight axial thrust without pivot play.

Unlike tie-rod ISO 15552 profile cylinders, this body uses a riveted rolling-packed aluminum barrel that crimps the front and rear covers directly to the tube, minimizing weight and footprint. The rod is carbon steel with a 20 um hard-chrome plating for wear resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. This base MBL configuration relies on a fixed rubber bumper to soften end-of-stroke impact rather than an adjustable air cushion, and because it lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke30 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT Is Used

precision_manufacturing

Injection Mold Ejection

Uses the 628 N push force at 0.5 MPa to knock finished plastic parts out of tight injection mold tooling spaces where larger cylinders cannot fit.

inventory_2

Packaging Carton Sealing

Drives short 30mm stroke folding heads on automated packaging lines, using the rigid U flat-end back cover to absorb direct axial thrust during repetitive carton sealing.

memory

PCB Router Clamping

Secures printed circuit board panels during high-speed routing operations, relying on the 20 um chrome-plated carbon steel rod to resist wear in dusty environments.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT the Right Cylinder?

At 0.5 MPa, this 40mm bore provides 628 N push and 528 N pull force. If your application requires less force, step down to the 32mm bore (402 N push), or if you need more power, step up to the 50mm bore (981 N push). The MBL40X30UT features a G1/4 port and a NPT tapered thread form. Because this SKU lacks the -S magnet code, it cannot support a sensor switch; if position feedback is required, select an MBL40X30SU variant instead. For applications needing end-stroke deceleration rather than a fixed rubber bumper, consider the MBLC40X30U adjustable air cushion version.

Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the rod will drift. Use an external pilot-operated check valve or a rod lock for fail-safe load holding. With a short 30mm stroke, side-load bending is minimal, but the 16mm rod still has low side-load tolerance, so ensure the load moves purely axially to avoid premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT FAQ

The MBL40X30UT has a 40mm bore and a 16mm rod with an M12x1.25 rod-end thread. At 0.5 MPa it provides 628 N push and 528 N pull force; at 0.7 MPa it provides 880 N push. The maximum theoretical force is 128 kgf at 1.0 MPa. The port size is G1/4 with a default NPT tapered thread form.

No. This base MBL model uses a fixed rubber bumper, not an adjustable air cushion (choose the MBLC variant for adjustable air cushioning). Additionally, because the model code lacks the -S suffix, it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches for rod position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X30UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X30UT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.