
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X350SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 350mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X350SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It belongs to the non-standardized MBL family, prioritizing a small footprint and low weight over ISO interchangeability. In this U flat-end rear cover configuration, the body mounts rigidly. It provides 628 N of push force and 528 N of pull force at 0.5 MPa, making it well-suited for moving moderate loads over a 350 mm travel distance.
Unlike tie-rod bodies that can be unbolted and rebuilt, this unit features a riveted rolling-packed barrel where the covers are crimped to the tube for maximum lightness. The bore uses a G1/4 port and a Ø16 carbon-steel rod with 20 µm hard-chrome plating for wear resistance. Because this SKU includes the -S suffix, it has a built-in magnet for position detection using AirTAC CMSG reed or DMSG/EMSG electronic switches. End-of-stroke deceleration relies on a fixed rubber bumper, not an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X350SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a 350 mm ejection stroke for small plastic parts inside a tight mold chassis, using 628 N of push force at 0.5 MPa to clear the tooling.
Pushes misaligned cartons off a 40 mm wide conveyor lane in a packaging line, utilizing the built-in -S magnet to confirm the fully extended reject position.
Shifts light electronics panels between testing stations, where the compact riveted aluminum barrel fits neatly within dense fixture routing.
If you need less force, step down to the 32 mm bore (402 N push at 0.5 MPa); if moving heavier masses, step up to the 50 mm bore (981 N push). For faster cycling with heavy payloads at the ends of this 350 mm stroke, consider the MBLC variant, which adds an adjustable air cushion. The base MBL relies on a fixed rubber bumper that softens end impacts but does not lock the rod—air pressure must be maintained to hold a load, or an external rod lock is required.
At 350 mm of stroke, the Ø16 rod is highly susceptible to bending under side loads. To prevent premature seal wear and rod-bearing failure, guide the load externally, use a pivot mounting accessory, or switch to the MBLD double-rod cylinder for anti-rotation resistance. This specific SKU features a U flat-end back cover, NPT tapered port threads, and the -S magnet.
Quick checklist
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa the push force is 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
No, the base MBL40X350SUT uses a fixed rubber bumper to soften end impacts. If your application requires adjustable end cushioning for heavier loads, you must select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.