
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X400-CAT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X400-CAT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers a robust 628 N push force at 0.5 MPa, making it well-suited for moving heavier jigs over its 400 mm stroke. The riveted rolling-packed barrel design keeps the body light and small, but it is not built to be disassembled like a traditional tie-rod cylinder. This specific SKU features a CA pivot back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads.
Because this model lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor switch. The piston relies on a heterogeneous two-way seal that retains grease for long service life, while the carbon steel rod features 20 µm hard-chrome plating to resist wear and corrosion. The end-of-stroke deceleration is handled by a fixed rubber bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400-CAT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 628 N push force and CA pivot bracket to arc large fabric rolls away from the weaving head over the 400 mm stroke without binding the rod.
Swings on its clevis pin to push 40 kg cardboard cartons across a narrow packaging conveyor where a larger ISO 15552 cylinder would not fit.
Leverages the 528 N pull force and compact riveted aluminum body to retract a sorting diverter arm in tight warehouse racking aisles.
If your application requires less force, the MBL32 bore provides 402 N push at 0.5 MPa; for heavier demands, the MBL63 offers 1558 N. For this 400 mm stroke, the small Ø16 mm rod has low side-load tolerance, so the CA pivot cover is highly recommended to prevent rod-bearing bending—pair it with an SDB pivot bracket. If you need precise end-position damping for fast cycling, step up to the MBLC variant for its adjustable air cushion.
This cylinder uses a G1/4 port (NPT thread form), an M12x1.25 rod-end thread, and the CA pivot back cover. Note that the fixed rubber bumper only softens end-of-stroke impact; it does not hold the load. If air pressure is lost or the valve is centred, the rod will drift or drop, so fit an external rod lock or pilot-operated check valve if position holding is critical.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N push and 528 N pull force. At 0.7 MPa, the push force increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, this base MBL model uses a fixed rubber bumper for end-of-stroke impact absorption and cannot be adjusted like the MBLC variant. Additionally, because it lacks the -S magnet suffix, you cannot mount a CMSG, DMSG, or EMSG sensor switch for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.