verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X400SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ40 mm
  • Stroke400 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$70.11 $77.61Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MBL40 stroke, mounting and version on one page All MBL40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT

The AirTAC MBL40X400SUT is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it delivers 628 N of push force and 528 N of pull force across its 400 mm stroke. The riveted rolling-packed barrel crimps the front and rear covers directly to the tube, creating a lightweight, sealed body that is not designed to be disassembled like a traditional tie-rod cylinder.

This specific SKU includes a U flat-end back cover for rigid fixed mounting and a built-in -S magnet for position detection. You can pair it with AirTAC CMSG reed switches or DMSG and EMSG solid-state sensors to confirm end-of-stroke placement. The carbon-steel piston rod features a 20 um hard-chrome plating to resist wear and corrosion, while the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ40 mm
Stroke400 mm
Acting typeDouble acting
Port size1/8"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT

MBLAluminum-barrel mini round cylinder, double acting.
40Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT Is Used

memory

PCB Conveyor Diversion

Pushes routing gates on a 400 mm travel to divert printed circuit boards between testing stations, using the 628 N push force to overcome sliding friction.

conveyor_belt

Packaging Carton Flap Folder

Extends 400 mm to fold large corrugated carton flaps during case erecting, relying on the DMSG electronic sensor to confirm full extension before taping.

inventory_2

Warehouse Tray Pusher

Ejects finished goods trays from a compact staging rack, utilizing the rigid U flat-end rear mount to anchor firmly against the machine frame.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT the Right Cylinder?

If you need to step down in force, the 32 mm bore provides 402 N of push at 0.5 MPa; stepping up to the 50 mm bore yields 981 N. This 40 mm model uses a G1/4 port, an M12x1.25 rod-end thread, and a fixed rubber bumper to soften end-of-stroke impact. If your application requires adjustable end-cushioning for heavier moving masses, select the MBLC variant instead. Remember that the rubber bumper only absorbs shock; it does not hold the load. If air pressure is lost, the rod will drift and drop, so install an external pilot-operated check valve if you need to maintain vertical position.

Because this model features a 400 mm stroke on a Ø16 mm rod, the unsupported length is highly susceptible to side-load bending. For this longer stroke, you must use an external guide rail, switch to a CA pivot back cover to allow angular self-alignment, or choose the MBLD double-rod cylinder to prevent rod deflection and premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT FAQ

At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

No, the base MBL40X400SUT uses a fixed rubber bumper to soften the end-of-stroke impact, not an adjustable cushion screw. If you need adjustable air cushioning for heavier loads, you must use the MBLC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MBL40X400SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.