
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X400UT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 400mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X400UT is a double-acting aluminum mini round cylinder engineered for compact spaces requiring a long 400mm stroke. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa, making it suitable for moving moderate loads over a substantial distance. This genuine AirTAC component features a U-type flat-end back cover for rigid, fixed mounting.
Unlike ISO tie-rod cylinders, the MBL body uses a riveted rolling-packed aluminum barrel that is permanently crimped, prioritizing a small footprint and low weight over field-rebuildability. Internal longevity is maintained by a heterogeneous two-way piston seal that retains grease, while the Ø16 mm carbon steel piston rod is protected by 20 um hard-chrome plating for wear and corrosion resistance. Note that this specific SKU lacks a built-in magnet, meaning no CMSG, DMSG, or EMSG sensor switch can be attached for position detection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X400UT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives the traversing guide arm on a weaving loom, using the 628 N push force at 0.5 MPa to maintain tension across fabric widths over the 400mm travel.
Transfers filled cardboard cartons from a roller conveyor to a palletizing station, where the long 400mm stroke clears the belt edge during retraction.
Extends into a deep-density storage rack to pull totes out onto an exit roller, relying on the 528 N pull force to overcome sliding friction.
For sizing context, stepping down to a 32mm bore drops the thrust to 402 N push at 0.5 MPa, while stepping up to a 50mm bore increases it to 981 N. If your application needs precise end-of-stroke deceleration for heavier moving masses, consider the MBLC variant which features an adjustable air cushion instead of this model's fixed rubber bumper. For single-acting push or pull operations (available in 20-40mm bores), look to the MSBL or MTBL series.
With a 400mm stroke on a Ø16mm rod, the unsupported length is significant; mini round cylinders have low side-load tolerance, so external linear guides or a pivot mounting are strongly recommended to prevent rod-bearing bending. Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or exhausted—the rod will drift. Use an external rod lock or pilot-operated check valve if position holding is critical. Replacement requires matching the 40mm bore, 400mm stroke, G1/4 port, NPT thread, and U flat-end cover.
Quick checklist
At 0.5 MPa, this 40mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 880 N. The theoretical maximum force is 128 kgf at 1.0 MPa. It operates at a speed of 30-800 mm/s.
No. The base MBL40X400UT uses a fixed rubber bumper to soften end-of-stroke impact; it does not have an adjustable air cushion (you would need the MBLC variant for that). Additionally, because this SKU lacks the -S magnet suffix, it cannot accept any CMSG, DMSG, or EMSG sensor switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.