
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL40X450SUT is a genuine double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 450mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL40X450SUT is a double-acting aluminum mini round cylinder engineered for tight machine spaces. It delivers 628 N of push force at 0.5 MPa and 528 N of pull force, making it a robust choice for moving moderate loads across a 450 mm stroke. The riveted rolling-packed barrel keeps the body light and compact, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU features a built-in magnet (-S) for use with CMSG, DMSG, and EMSG sensor switches to track rod position. It uses a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable cushion. The carbon-steel piston rod is plated with 20 μm of hard chrome for wear resistance, and the heterogeneous two-way piston seal retains grease for a long service life. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL40X450SUT |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides 628 N of push force to actuate routing gates on high-speed packaging conveyors, fitting easily within the machine's narrow frame.
Uses the -S magnet with a DMSG electronic sensor to confirm stroke position when lifting populated PCB panels across a 450 mm vertical travel.
Extends 450 mm to push storage trays out of dense shelving racks, relying on the hard-chrome plated rod to resist wear from repetitive cycles.
For lower force needs, stepping down to the 32 mm bore yields 402 N of push force at 0.5 MPa. If your application requires significantly more thrust, the 50 mm bore provides 981 N. Because this is a 450 mm stroke, the small 16 mm rod is highly susceptible to bending under side loads; you must use an external guide or select the MBLD double-rod anti-rotation type. The U flat-end back cover provides a rigid fixed rear mount. Note that the rubber bumper softens impact but does not hold the load if air pressure drops—use an external rod lock for position holding.
Quick checklist
This 40 mm bore cylinder uses a G1/4 port and a 16 mm rod. It generates 628 N push and 528 N pull at 0.5 MPa, 880 N push at 0.7 MPa, and a maximum theoretical force of 128 kgf at 1.0 MPa.
No, the base MBL uses a fixed rubber bumper to absorb end-of-stroke impact. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.